Item
Communication Mode
SSID
Channel
WEP
Input using hex
Active WEP Key
WEP Key Length
WEP Key (1 to 4)
WPA/WPA2
PSK (Pre-shared Key)
Advanced Settings...
button
OK button
Cancel button
Explanation
Select the wireless LAN mode.
Enter the SSID for the wireless LAN group to connect to. It is initially set to EpsonNetIBSS, but make sure you change this value.
It only accepts ASCII, up to 32 characters.
You can enter either name of ESS ID and SSID here.
Enter the ESS ID of the access point if the wireless LAN group operates in the Infrastructure mode.
Only available when the wireless LAN operates in the Ad Hoc mode. Specify the same channel as used on the wireless LAN.
Select this check box when using WEP Keys for encryption. Select this check box when entering WEP Keys in hexadecimal. The default is to enter them in ASCII.
When more than one WEP Keys are specified, choose one as the active key. Select the length of a WEP Key. This indicates the strength of the encryption. Enter WEP Keys
The exact format for a WEP Key varies according to the values in the fields Input using hex and WEP Key Length.
For a
ASCII.
For a
ASCII.
The WEP Keys you enter here will all become hidden from view after the network interface is configured. Do not forget your WEP Keys.
Select this check box when using WPA/WPA2 with a PSK
Grayed out when your network interface does not support WPA/WPA2.
Enter the PSK
Click this button if you want to proceed to make advanced settings on the wireless LAN. Normally you do not need to change them. Do it only if you need to improve wireless communication performance.
See 6.6.1 Wireless Advanced Settings dialog box for more information. Click the OK button to save new settings. The password is required. Click the Cancel button to discard any changes.
18/25
©SEIKO EPSON CORPORATION