How to run the mixer manually.
SPEED Mode.
Enter the speed desired.
Push
Enter the time desired.
Push
Push
How to input a program.
A flashing display indicates that it is expecting the operator to key in a value.
A step is always a combination of speed and time.
An example is 100 R.P.M. for 5:00 minutes or 0 R.P.M. for 15 seconds (which is a 15 second pause) Please note that the mixer will not start automatically after a pause, the start button must be pushed to proceed to the next step.
Up to 25 programs , each constisting of 9 steps , can be stored in memory.
| A Sample Program |
| |
Program Number | Step | Speed | Time |
1 | 1 | 60 | 1:00 |
| 2 | 200 | 5:00 |
| 3 | 0 | :20 |
| 4 | 110 | 4:00 |
| 5 | 180 | 2:00 |
| 6 | 0 | 0:00 |
“0” Speed and “0” Time in the last step is mandatory. The control system will read it as a “end of pro- gram” mark.
4