Jura Capresso IMPRESSA S70 Replacing of filter, Drawing off coffee, Drawing off powder coffee

Page 10

 YES flashes

To confirm press key P . An acoustic signal can be heard.

 RINSE FILTER / OPEN TAP

Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20). Turn selector switch for coffee or hot wa- ter/steam (19) to position .

 PLEASE WAIT / FILTER RINSING

 CLOSE TAP (the system gives off steam)

 FILTER YES

Press key N .

 COFFEE READY

The water might be slightly discoloured (this is not dama- ging to the health).

7.2 Replacing of filter

After drawing off 50 litres the filter loses its effect.

 REPLACE FILTER

If only a little water is drawn off the filter should be changed every 2 months. However no message will appear on the display. You will find a special turntable on the cartridge mounting to set the replacement date.

Empty water tank and pull up cartridge mounting. Pressing light- ly, place the filter cartridge in the water tank (Fig. 2).

Pull down cartridge mounting, until it engages audibly.

Fill water tank with cold, fresh tap-water and replace it.

Switch the machine on by pressing key ON/OFF .

Open front cover (3) and press key , until you hear an acoustic signal.

 RINSE FILTER / OPEN TAP

Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20). Turn selector switch for coffee or hot water/steam (19) to position .

 PLEASE WAIT / FILTER RINSING

 CLOSE TAP (the system gives off steam)

 COFFEE READY

The water might be slightly discoloured (this is not damaging to the health).

8. Drawing off coffee

Switch the machine on by pressing key ON/OFF .

 PLEASE WAIT

 RINSE UNIT

Put an empty cup under the coffee-spout (15) and press rinsing key .

 UNIT RINSING

 COFFEE READY

Put 1, respectively 2 cups under the coffee-spout and press the required key. The pre-brew system (I.P.B.A.S©) moistens the coffee powder, briefly interrupts the flow and then starts the real brewing process.

You can interrupt the flow of coffee at any time by simply pressing any of the coffee keys.

To obtain a perfect head of froth adjust the coffee-spout (15) to the size of your cups (Fig. 3).

8.1 Drawing off powder coffee

Open cover (3)

Press selector key for pre-ground powder coffee .

10

Image 10
Contents Impressa S70 Jura Impressa S70 Page 17 18 19 Operating elements Jura Impressa S70 Programming keysTable of contents Important information for the user Safety instructionsSafety precautions DescriptionChecking fuse Adjusting grinderCheck before use Checking mains voltage Adding coffee beansPlacing filter Adjusting for water hardnessUse of Claris filter cartridges  Press KEY / Powder QuantityDrawing off powder coffee Replacing of filterDrawing off coffee  Rinse Filter / Open TAPDrawing off hot water Using steamSwitching off machine  Fill PowderProgramming Powder Quantity Programming coffee temperatureProgramming Programming water quantityProgramming Timer Clock Programming Water Hardness only with setting Filter noProgramming Economy Mode Programming automatic switch on timeCup counter Programming automatic switch off timeCare and maintenance Fill water Programming language selectionGeneral cleaning instructions Clean machineCleaning metal contacts Fill beansDecalcifying CleaningRegular servicing Decalcifying coffee sectorDisposal Decalcifying water sectorTips for a perfect coffee Messages Problems Legal information Technical specifications Impressa S70