|
| Cause | Action |
|
|
|
|
CLEAN UNIT | You have drawn off coffee 220 times or run | Clean as described in chapter 14 | |
|
| the rinsing program 180 times |
|
|
| Message still displayed, although machine cleaned | Run cleaning program again; this time do |
|
|
| not add cleaning tablet |
|
|
| |
UNIT CALCED | The appropriate sector needs decalcifying | Run decalcifying program as described | |
COFFEE SECTOR |
| in chapter 15 | |
WATER SECTOR | Message still displayed, although machine decalcified | Run cleaning program again; this time using | |
|
| ||
|
|
| water only and without decalcifying agent |
|
|
| |
CLOSE TAP | Not ready to provide water or steam | Switch over to coffee sector, press water or | |
|
|
| steam key and then draw off the water or steam |
|
|
| required |
|
|
|
|
FAULT | Various causes | Ring the hotline |
|
|
|
E
19. Problems
Problem | Cause | Action |
|
|
|
Coffee only flows in dribs | – Powder too fine |
and drabs while drawing off |
|
–Adjust grinder to a coarser grinding
–Run one or two rinse programs
–If result is no better, clean the machine
–as per instruction
Coffee flow is stopped | – Not enough coffee powder in the system | – Draw off one cup of coffee |
after |
|
|
|
|
|
Grinder is extremely noisy | – Foreign element in grinder | – Proceed as described in chapter 13.5 |
|
|
|
19