If a Claris filter cartridge is used, remove it beforehand.
13.10 Regular servicing
Regular Jura services ensure your machine’s reliability and longer life. Keep the original packaging to protect the machine while being transported.
14. Cleaning
The machine has an integrated cleaning program. The procedure lasts about 15 minutes. Please use Jura cleaning tablets only. These are available from your Jura dealer.
It is essential not to interrupt the process once it has been started.
Switch on machine by pressing 
key.
Press key 
until you can hear an acoustic signal.
EMPTY TRAY (FILL WATER might show as well)
Put a sufficiently large container under the
ADD TABLET (Fig. 9) / PRESS CLEANING
UNIT CLEANING
EMPTY TRAY
RINSE UNIT
COFFEE READY
The powder funnel for
15. Decalcifying
Your machine has an integrated decalcifying program (duration approx. 35 min.).
Please use Jura decalcifying tablets only. These are available from your Jura dealer.
Run the decalcifying program only after the machine has been switched off for at least 5 hours and has cooled down completely. The running decalcifying program must not be interrupted.
If using acidic decalcifying agents be sure to immediately remove any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take cor- responding precautions.
In any case please wait until the filled decalcifying agent is used up and the tank is empty. Never top up the decalcifying agent.
15.1 Decalcifying coffee sector
Remove and empty water tank.
Replace empty water tank.
Switch off your machine by pressing ON/OFF 
key.
Open cover (3).
Press key 
until you can hear an acoustic signal.
EMPTY TRAY
AGENT IN TANK
Pour 0.6 litres of water into a container and completely dissolve the contents of a blister pack (2 tablets). Then fill the mixture into the water tank.
CHOOSE SECTOR / AGENT IN TANK / PRESS CALC
Turn selector switch for coffee to the symbol 
.
Press key 
.
16