Jura Capresso IMPRESSA S70, IMPRESSA X70 manual Messages

Page 18

18. Messages

 

 

Cause

Action

 

 

 

 

FILL WATER

Water tank is empty

Top up with water

 

 

Water level indicator in tank is jammed

Empty tank, rinse out, fill up and replace

 

 

Tank is calcified, water level indicator is stuck

Remove tank, decalcify, rinse well, fill up with

 

 

 

water and replace

 

 

 

FILL BEANS

Bean container is empty

Top up with beans

 

 

Message still displayed, although beans filled

Draw off cup of coffee. FILL BEANS message

 

 

 

only disappears after coffee is drawn off

 

 

A foreign object is stuck in the grinder

Remove foreign object as described in chapter

 

 

 

13.5 “Removing foreign objects”

 

 

 

EMPTY GROUNDS

Coffee grounds container is full

Remove drip tray, empty grounds container,

 

 

 

replace tray

Message still displayed, although grounds container emptied.

The tray was out of the machine for less than 8 sec for emptying. Take tray out again for approx. 10 sec and replace

 

The message appears after only a few cups

Leave the machine switched on while

 

have been drawn off

the grounds container is being emptied. The

 

 

counter is only reset to zero if the machine is left

 

 

switched on

 

 

 

TRAY MISSING

Tray has not been replaced correctly

Insert tray correctly

 

Grounds have fallen under tray and are preventing

Remove tray, clean inside

 

it from being correctly inserted

of machine, replace tray

 

 

 

EMPTY TRAY

The residual water container is full

Remove container carefully, empty, rinse out

 

 

and replace

 

Message still displayed, although container emptied

Remove container, clean metal contacts

 

 

(please refer to chapter 13.8)

 

 

 

18

Image 18
Contents Impressa S70 Jura Impressa S70 Page 17 18 19 Operating elements Jura Impressa S70 Programming keysTable of contents Important information for the user Safety instructionsSafety precautions DescriptionChecking fuse Adjusting grinderCheck before use Checking mains voltage Adding coffee beansPlacing filter Adjusting for water hardnessUse of Claris filter cartridges  Press KEY / Powder QuantityDrawing off powder coffee Replacing of filterDrawing off coffee  Rinse Filter / Open TAPDrawing off hot water Using steamSwitching off machine  Fill PowderProgramming Powder Quantity Programming coffee temperatureProgramming Programming water quantityProgramming Timer Clock Programming Water Hardness only with setting Filter noProgramming Economy Mode Programming automatic switch on timeCup counter Programming automatic switch off timeCare and maintenance Fill water Programming language selectionGeneral cleaning instructions Clean machineCleaning metal contacts Fill beansDecalcifying CleaningRegular servicing Decalcifying coffee sectorDecalcifying water sector DisposalTips for a perfect coffee Messages Problems Legal information Technical specifications Impressa S70