Jura Capresso S90 Drawing off hot milk using the Auto-Cappuccinatore S9, Switching off machine

Page 12

With the flow-adjustment you can set the optimum frothing. Turn the handle slightly to the right or to the left until you obtain the required result.

Fill water in a jug and immerse the intake-tube in the water. Now draw off steam until the water/steam mixture flowing into your cup is completely clean. Your Auto-Cappuccino is clean again.

11.3Drawing off hot milk using the Auto-Cappuccinatore S9

The Auto-Cappuccinatore of the S9 can be used to draw off hot milk. Adjust the selector lever (1) (Fig. 10) to position (3) to draw off hot milk.

Install the Auto-Cappuccino. This is included in your Welcome Pack.

11.4Drawing off cappuccino using the Auto-Cappuccintore S9

The Auto-Cappuccinatore of the S9 can be used to draw off capuc- cino. Adjust the selector lever (1) (Fig. 10) to position (2) to draw off capuccino.

11.5Controlling the temperature using the Auto-Cappuccinatore S9

Adjust the selector lever (1) to + for hot milk/cappuccino or - for less hot milk/cappuccino. Individual fine adjustment is possible.

11.6 Cleaning the Auto-Cappuccinatore

Remove Auto-Cappuccinatore (21). If you do not achieve optimum results, disassemble the flow controller and the selector lever (Fig. 10 for S9). Thoroughly rinse these parts with water.

As soon as you have frothed enough milk, it is important to clean the Auto-Cappuccino.

12. Switching off machine

When the machine is switched off, the rinsing program is auto- matically run again. Therefore place an empty container under the coffee-spout (15) and press ON/OFF key . When the rinsing water has run into the container, the machine powers down. Dis- card the water.

13. Programming

Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be pro- grammed individually. The programming keys are located behind the front cover (3).

The following settings can be programmed:

Powder quantity

Coffee temperature

Water quantity

Steam portion

Tea portion

Filter

Water hardness

Economy mode

Timer clock

Automatic switch on time

Automatic switch off time

Supplies and cup counter

Language selection

12

Image 12
Contents Impressa S90/S95/S9 Impressa X90/X95 Impressa Jura Impressa S90/S95/S9 X90/X95 Page Page Instructions for use Programming keysTable of contents Safety instructions Safety precautionsImportant information for the user DescriptionAdjusting grinder Check before use Checking mains voltageChecking fuse Adding coffee beansAdjusting for water hardness Rinsing the machineUse of Claris filter cartridges Placing filterReplacing of filter Drawing off coffee Press KEY / Powder Quantity  Rinse Filter / Press SteamDrawing off powder coffee Drawing off hot waterDrawing off steam Impressa S9 Frothing up milk with the Auto-CappuccinoDrawing off hot milk using the Auto-Cappuccinatore S9 Drawing off cappuccino using the Auto-Cappuccintore S9Cleaning the Auto-Cappuccinatore Switching off machineProgramming coffee temperature Programming powder quantityProgramming water quantity Programming steam portionProgramming economy mode Programming timer clock Economy Mode OFF Programming FilterProgramming automatic switch on time Programming automatic switch off timeCare and maintenance Fill water Cup counterClean machine Cleaning metal contactsEmpty grounds container Empty drip trayGeneral cleaning instructions CleaningRegular servicing Empty system Clean Contacts / Empty Tray  Empty Tray  Agent in Tank Press Calc  Empty Tray  Fill WaterDisposal Tips for a perfect coffeeMessages Problems Clean UnitFault Unit CalcedTechnical specifications Legal information
Related manuals
Manual 22 pages 54.82 Kb Manual 6 pages 49.41 Kb