Jura Capresso 601, S9 Programming automatic switch on time, Programming automatic switch off time

Page 15

13.10 Programming automatic switch on time

A programming of the timer clock is necessary if an automatic switch on is needed.

 UNIT ON —.—

Press key P .

By briefly pressing key + or - you can set the hours and then confirm by pressing key P .

By briefly pressing key + or - you can set the minutes and then confirm by pressing key P .

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

To switch off the automatic timer proceed as follows: Press key P

Press key N

UNIT ON —:—

13.11 Programming automatic switch off time

 OFF AFTER 5.0 HOURS

Press key P

By briefly pressing key + or - you can set the hours and then confirm by pressing key P (0.5 to 9.0 hours).

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.12 Cup counter

 200 SUPPLIED (TOTAL SUPPLIED)

To obtain the information press the required key. The display will show you the number of times the function has been chosen.

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

It is not possible to call up hot water and steam supplies.

13.13 Programming language selection

Press key P

By briefly pressing key + or - call up the language desired and then confirm by pressing key P .

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.14 Program key N

By using key N you can set back the following settings (powder quantity, coffee temperature, water quantity, steam portion, tea portion) to their original standard settings.

 COFFEE READY

 Press key

N until you can hear an acoustic signal.

E

 

If a mistake occurs while programming one of the above settings, just press key N and the chosen setting moves back to its original standard setting.

14. Care and maintenance

14.1 Fill water

 FILL WATER

If this message shows on the display no more coffee can be drawn off. Top up water.

The water tank should be rinsed and filled with fresh water daily. Only use fresh, cold water. Never top up with milk, mineral water or any other liquids. You can top up water without removing tank.

15

Image 15
Contents Impressa S90/S95/S9 Impressa X90/X95 Impressa Jura Impressa S90/S95/S9 X90/X95 Page Page Programming keys Instructions for useTable of contents Description Safety instructionsSafety precautions Important information for the userAdding coffee beans Adjusting grinderCheck before use Checking mains voltage Checking fusePlacing filter Adjusting for water hardnessRinsing the machine Use of Claris filter cartridges Rinse Filter / Press Steam Replacing of filterDrawing off coffee  Press KEY / Powder QuantityFrothing up milk with the Auto-Cappuccino Drawing off powder coffeeDrawing off hot water Drawing off steam Impressa S9Switching off machine Drawing off hot milk using the Auto-Cappuccinatore S9Drawing off cappuccino using the Auto-Cappuccintore S9 Cleaning the Auto-CappuccinatoreProgramming steam portion Programming coffee temperatureProgramming powder quantity Programming water quantityProgramming Filter Programming economy modeProgramming timer clock  Economy Mode OFFCup counter Programming automatic switch on timeProgramming automatic switch off time Care and maintenance Fill waterEmpty drip tray Clean machineCleaning metal contacts Empty grounds containerEmpty system General cleaning instructionsCleaning Regular servicing Empty Tray  Fill Water  Clean Contacts / Empty Tray Empty Tray  Agent in Tank  Press CalcTips for a perfect coffee DisposalMessages Unit Calced ProblemsClean Unit FaultLegal information Technical specifications
Related manuals
Manual 22 pages 54.82 Kb Manual 6 pages 49.41 Kb