Jura Capresso S90, S95, 601 manual Programming powder quantity, Programming coffee temperature

Page 13

13.1 Programming powder quantity

Switch the machine on by pressing ON/OFF key .

Press key P until you can hear an acoustic signal.

 POWDER QUANTITY / SELECT KEY

Now press the key that you want to programme. Use the key for 1 cup only. The corresponding quantity for 2 cups is adjusted automatically by the machine after programming is finished.

 POWDER

-·········· II ·········· +

The powder quantity can be selected by pressing keys + or - briefly.

To store the new powder quantity in memory briefly press key P .

 POWDER QUANTITY / SELECT KEY.

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.2 Programming coffee temperature

 TEMPERATURE COFFEE / SELECT KEY

Now press the key that you want to programme.

Select the required temperature (high or normal) by activating key + or - .

To store the new coffee temperature in memory briefly press key

P.

 TEMPERATURE COFFEE / SELECT KEY

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.3 Programming water quantity

 WATER QUANTITY / SELECT KEY

Put a cup under the coffee-spout (15) and then press the key that you want to programme.

 The selected value is confirmed

Now your machine prepares a coffee.

 ENOUGH COFFEE? / PRESS KEY P

 OK? P - ·········· II ·········· +

When the required water quantity is reached press key P . You can call up the next setting by pressing key + .

There is an additional possibility to alter the water quantity

anew. Press key + or - for this purpose.

If you wish to draw another coffee to control the water quantity, press key again otherwise press key P briefly to store water quantity in memory.

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.4 Programming steam portion



STEAM PORTION

E

 Press key

P .

 



PORTION /....20 SEC.

 

 By pressing key

+ or - you can programme time in seconds

 

(drawing off time of 3 – 250 sec.)

 

 Press key

P .

 

 



STEAM PORTION

 

 By pressing the

+ button, you can select the next phase, or

 

press the

N button in order to leave the programming.

 

13.5 Programming tea portion

Place a cup under the height-adjustable tea-spout (22).

Press key P .

 OPEN TAP

 ENOUGH TEA? / CLOSE TAP

 TEA PORTION

13

Image 13
Contents Impressa S90/S95/S9 Impressa X90/X95 Impressa Jura Impressa S90/S95/S9 X90/X95 Page Page Programming keys Instructions for useTable of contents Safety precautions Safety instructionsImportant information for the user DescriptionCheck before use Checking mains voltage Adjusting grinderChecking fuse Adding coffee beansRinsing the machine Adjusting for water hardnessUse of Claris filter cartridges Placing filterDrawing off coffee Replacing of filter Press KEY / Powder Quantity  Rinse Filter / Press SteamDrawing off hot water Drawing off powder coffeeDrawing off steam Impressa S9 Frothing up milk with the Auto-CappuccinoDrawing off cappuccino using the Auto-Cappuccintore S9 Drawing off hot milk using the Auto-Cappuccinatore S9Cleaning the Auto-Cappuccinatore Switching off machineProgramming powder quantity Programming coffee temperatureProgramming water quantity Programming steam portionProgramming timer clock Programming economy mode Economy Mode OFF Programming FilterProgramming automatic switch off time Programming automatic switch on timeCare and maintenance Fill water Cup counterCleaning metal contacts Clean machineEmpty grounds container Empty drip trayCleaning General cleaning instructionsRegular servicing Empty system Empty Tray  Agent in Tank  Clean Contacts / Empty Tray Press Calc  Empty Tray  Fill WaterTips for a perfect coffee DisposalMessages Clean Unit ProblemsFault Unit CalcedLegal information Technical specifications
Related manuals
Manual 22 pages 54.82 Kb Manual 6 pages 49.41 Kb