Appendix A
HP E1368A/69A/70A Specifications
HP E1368A Microwave Switch
Frequency Range:
Characteristic Impedence: 50Ω
Insertion Loss:
Isolation:
VSWR (50Ω load):
Maximum Input Power: 1 Watt average.
100 Watts peak. <±7Vdc
Repeatability (typical):
0.03dB after 106 switching
HP E1369A Microwave Switch Driver
STANDARD VXIbus
INFORMATION
(Applies to both the HP E1368A and E1369A unless otherwise noted)
Module Size/Device Type:
B,
Connectors Used: P1
No. Slots: |
|
E1368, E1369 | 1 |
E1370 | 2 |
VXIbus interface capability:
Slave, Interrupter, A16, D16
Interrupt level:
POWER REQUIREMENTS:
HP E1368A
Voltage: +5 Peak module current,
IPM(A): 1.30 Dynamic module current,
IDM(A): 0.01
Watts/slot: 5.00 Cooling/slot:
0.08mm H20 @ 0.42 liter/sec
HP E1370A
Voltage: +5 Peak module current,
IPM(A): 0.01 Dynamic module current,
IDM(A): (see note 2)
Watts/slot: 0.50 0.08mm H2O @0.05 liter/sec (see note 2)
MISCELLANEOUS:
Humidity:
65%, 0°to 40°C
Operating Temperature:
0° to +55° C
Storage Temperature:
EMC, RFI, Safety:
meets FTZ 1046/1984, CSA 556B, IEC 348, UL 1244
Net weight (kg): |
|
HP E1368A: | 0.5 |
HP E1369A: | 0.2 |
HP E1370A: | ?? |
Switching Dwell Time:
35msec
Driver OutPut per switch:
5V or 12V (see note 1)
Maximum Energizing Voltage:
42Vpk (see note 1)
HP E1369A Voltage: +5 Peak module current, IPM(A): 0.01 Dynamic module current, IDM(A): (see note 2) Watts/slot: 0.50 Cooling/slot:
0.08mm H20 @ 0.05 liter/sec (see note 2)
NOTES:
1.Control circuit can switch a maximum of 1A per switch. Maximum current also depends on the output capability of the mainframe used.
2.Power and cooling requirements depend on switches installed; see HP E1368A for an example of the requirements for 3 HP 3331X or HP 876X switches.
Appendix A | HP E1368A/69A/70A Specifications 73 |
