DISPlay
The DISPlay subsystem monitors the channel state of a selected module (or card) in a switchbox. This subsystem only operates with mainframes that have a display, such as the HP 75000 Series B Mainframe (HP Model Number E1301A).
Subsystem Syntax | DISPlay |
| :MONitor |
| :CARD <number AUTO> |
| [:STATe] <mode> |
| [:STATe]? |
:MONitor:CARD | DISPlay:MONitor:CARD <number AUTO> selects the module in a | |||
| switchbox to be monitored when the monitor mode is enabled. Use the | |||
| DISPlay:MONitor:STATe command to enable and disable the monitor mode. | |||
Parameters |
|
|
|
|
|
|
|
|
|
| Parameter Name | Parameter Type | Range of Values | Default Value |
|
|
|
|
|
| number AUTO | numeric | 1 - 99 or AUTO | AUTO |
|
|
|
|
|
|
| |||
Comments | ∙ Selecting a Specific Module to be Monitored: Use the | |||
| DISPlay:MONitor:CARD command to send the card number in a | |||
| switchbox to be monitored. |
|
| |
∙Selecting the Present Module to be Monitored: Use the
DISPlay:MONitor AUTO command to select the last module addressed by a switching command (e.g.,[ROUTe:]CLOSe).
∙*RST Condition: DISPlay:MONitor:CARD AUTO
Example Select Module #2 in a Switchbox for Monitoring
DISP:MON:CARD 2 | Selects module #2 in a switchbox |
| to be monitored when the mode is |
| enabled. |
Chapter 4 | HP E1368A/69A/70A Command Reference 53 |
