Rancilio epoca Installation, Connections to be made by the user, Water supply, Electric supply

Page 16

6. INSTALLATION

The appliance is only to be installed in lo- cations where use and maintenance is restricted to trained personnel.

The machines are fitted with height adjustable feet. The support surface shall be levelled, dry, smooth, steady and stable and at such a height that the cup- warming surface is at over 150 cm from ground. Do not use water jets or install where water jets are used.

In order to guarantee normal operation, the machine must be installed in areas that the environmental temperature is between +5°C +32°C end humidity of not over 70%.

It does not need to be anchored to the surface and it does not require any technical operations to dampen vibrations in order to operate properly.

It is recommended to leave the area around the ma- chine free to facilitate its use and the performance of any maintenance operations.

If the machine is wet or very damp, wait until it is completely dry before installing or using it. It is always necessary to request an accurate control to qualified service people in order to find any possible damage to the electric components.

Reserve an area near the machine for the installa- tion of the coffee grinding and dosage machine (see relevant documentation).

The machine is usually equipped with a water sof- tener, type DP2 or DP4, which must be connected by the user in compliance with the laws in force. Should a different softener be installed, refer to the documentation of the relevant product.

A dreg drawer should be fitted by the installer.

6.1.Connections to be made by the user.

Hook-up must be carried out by qualified personnel in full accordance with federal, state and local regulations.

6.1.1. Water supply (Fig.6)

This equipment is to be installed to comply with the applicable federal, state

or local plumbing codes.

Connections must be installed close to the machine.

Water drainage pipe 1, having a minimum internal diameter of 30 mm, equipped with a water-trap accessible for inspection.

Water supply pipe 2, with a 3/8"G cut-off tap.

Make sure that the maximum supply pressu- re does not exceed 6.5 bar; otherwise, install a pressure reducer.

6.1.2. Electric supply

The machine is supplied ready for connection according to the required electrical specifications.

Before connecting the machine ensure that the plate details comply with those of the electric distribution network.

The electrical connection cable must be directly connected to the connection provided according to current legislation. Ensure that the earthing system is efficient and in compliance with current legal re- quirements.

The earthing system and the lightening protection system must be realized in accordance with the provisions of current legislation.

For the supply network use a cable in compliance with standards with protective conductor (earthing wire).

For three-phase power use a cable with 5 conductors ( 3 phases + neutral + earth).

For single phase power supply use a cable with 3 conductors (phase + neutral + earth).

In both cases it is necessary to provide an automatic differential switch (Fig. 6) at the start of the power cable, complete with magnetic release elements in accordance with the identification plate details (Fig. 1). The contacts must have an opening of equal or over 3 mm and with dispersed current protection of 30 mA.

Remember that each machine must be fitted with its own safety elements.

WARNING:

Should the power supply cable be damaged it is to be replaced by the manufacturer or by its technical assistance service or by person with equivalent qualification, in order to pre- vent any risks.

46

Image 16
Contents Page Gentile cliente Grazie per averci accordato la Sua fiducia European Union only Treatment of waste from electric/electronic equipmentPage Villastanza di Parabiago MI Viale della Repubblica Page Fluido Fluide Capacità lt-Capacité lt-Fähigkeit lt Mod. DE Mod. CD Ø30mm Mod. CD S Page EN English Symbols General Safety RulesGroups Specifications and composition DescriptionMachine equipment Mechanical protective devicesTechnical Data TransportInstallation Connections to be made by the userWater supply Electric supplyConnections OperationControls Cup-heater switch optional Control instrumentsStarting up Model S Model DE CDAdjusting the dose Preparing cappuccinoHeating a beverage Preparing tea, camomile, etcMaintenance Periodical maintenanceWeekly Renewal of water in the boilerProblems and Remedies Stopping the MachineRegeneration Temporary stop

epoca specifications

The Rancilio Epoca is a prominent commercial espresso machine recognized for its blend of robust performance, elegant design, and user-friendly features. Since its inception, it has become a staple in cafes and restaurants, appealing to both professional baristas and coffee enthusiasts seeking quality and innovation.

One of the standout features of the Rancilio Epoca is its dual boiler system, which allows for simultaneous brewing and steaming. This technology significantly enhances productivity during peak hours, ensuring that baristas can deliver exceptional espresso shots while maintaining the capability to froth milk efficiently. The separate boilers also ensure optimal temperature stability for both espresso and steam, crucial for achieving the perfect extraction and milk texture.

Temperature control is a key aspect of the Epoca, featuring independent temperature regulation for each brewing group. This allows baristas to customize the brewing temperature to match various coffee beans and styles, ensuring optimal flavor extraction for each shot. The machine also comes equipped with digital display controls, providing easy access to important parameters and settings.

Efficient energy consumption is another highlight of the Rancilio Epoca. The machine is designed to minimize energy usage without compromising performance. It features a low-heat transfer design, which keeps the energy consumption at bay while still providing consistent heat for brewing and steaming.

The Rancilio Epoca is constructed with high-quality materials, including stainless steel, ensuring durability and longevity in a busy coffee environment. The machine’s maintenance is straightforward, with easy access to key components, facilitating regular cleaning and servicing. This accessibility helps to maintain the machine in optimal working condition, prolonging its lifespan and reducing downtime.

Ergonomically designed, the Rancilio Epoca also prioritizes user comfort. Its height-adjustable work area allows for accommodating various cup sizes, making it versatile for different serving needs. The machine's controls are intuitively placed, ensuring that baristas can operate the machine efficiently even during the busiest hours.

Overall, the Rancilio Epoca embodies the perfect combination of tradition and innovation. With its advanced technologies, exceptional brewing capabilities, and emphasis on user experience, it has solidified its place as a premier choice for those serious about coffee. Whether in a high-traffic cafe or a boutique espresso bar, the Rancilio Epoca delivers quality performance that stands the test of time.