PROGRAMMED DEFROST
The power levels for defrosting are predetermined and programmed for the beginning of the chosen time and at power level 30 for the
into this oven. The oven will defrost at "HI" power remaining period of time.
1.Touch CLEAR.
2.Touch PROGRAMMED DEFROST. "0" will show in the display window.
3.Set the defrosting time by following the "Programmed Defrosting Chart" on Pages 22 through 25.
EXAMPLE: To defrost two pounds of the PROGRAMMED DEFROST cycle
I. Touch CLEAR.
2.Touch PROGRAMMED
DEFROST. The display window will show "0".
ground beef, use for 9 minutes.
l_onmor_s
4.Touch START. The oven will begin and the time will
begin counting down in the display window. A tone will sound when the time is over and the oven will
automatically shut'off.
NOTE: If you plan to use additional cooking stages immediately following Programmed Defrost cycles, you
must allow for standing time as recommended on the Programmed Defrosting Charts on pages 22 through 25.
_EZ3_
FfIF_F_
This can be accomplished as follows:
I. Touch PROGRAMMED DEFROST and enter the defrosting time.
2.Touch MEMORY/RECALL
3.Touch TIME.
4.Enter standing time per charts (pages 22 thru 25).
5.Touch POWER CONTROL.
6.Enter "0".
7.Touch MEMORY/RECALL.
8.Set the next cooking stage per cookbook or USE AND CARE INSTRUCTIONS.
The cooking process can be set for up to 3 stages when Programmed Defrost is one of the stages.
i
. Set 9 minutes by touching "9", "0" and "0". "900" will show in
the display window.
Kerlnaor8
. Touch START. The oven will begin to operate and time will begin to count down in the dis-
play window.Kenc_ore A tone will sound and the word
"End" will show in the display window for two seconds when time is over and the oven will automatically shut off.
21