MULTI-STAGE COOKING
(Cont'd)
Second Stage |
|
| |
(2 minutes; | Power level | "HI") |
|
6. Touch | MEMORY/RECALL | Ken_ore | |
The display window | will show |
|
_0 _,
7.Touch TIME.
8.Set 2 minutes by touching "2", "0" and "0". "200" will show in
the | display window. (Power is | l'q_nmore |
on | "HI".) |
|
The second stage has been set. |
|
_eLE_Se
9.Touch START. The first stage will begin. "800" will show in the display window. The oven will
begin to cook | at 50 | (SIMMER) | ig_nrT_ore |
and the time will begin to |
| ||
counting down in the display |
| ||
window. When the 8 minutes |
| ||
are over, a tone will sound and |
| ||
the oven will proceed into the |
| ||
second stage. The oven will |
| ||
begin to cook at "HI" power. |
| ||
When the 2 minutes are over, |
| ||
a tone will sound and the word |
| ||
"End" will show in the display |
| ||
window and the oven will |
| ||
automatically | shut | off. |
|
The oven will have finished both stages.
NOTE: If you want to keep the food warm after finishing the cooking cycle, you can use "Hold Warm" feature. For detailed instructions on using "Hold Warm" feature, see page 12.
DELAY START COOKING
Delayed cooking can be done by using the MULTI- STAGE COOKING feature. After counting down the preset delay time, the oven will cook for the chosen cooking time.
I. Touch CLEAR..
2.Touch TIME.
3.Touch the correct numbers for the required delay time.
4.Touch POWER CONTROL.
5.Touch "0" (power level 0).
6.Touch MEMORY/RECALL
7.Touch TIME or TEMP CONTROL.
8.Touch the correct numbers for the required cooking time or food temperature.
9.Touch POWER CONTROL.
10.Touch the correct numbers for desired cooking power level.
II.Touch START.
NOTE: A preset delay time must be no more than 99 minutes and 99 seconds.
27