Kenmore 790.9805 manual Surface Cooking, Before Setting the Oven Controls, Cookware Material types

Page 10

Surface Cooking

Selecting Surface Cooking Cookware

Cookware should have flat bottoms that make good contact with the entire surface heating element. Check for flatness by rotating a ruler across the bottom of the cookware (See Figure 1). Be sure to follow the

recommendations for using cookware as shown in

Correctincorrect

t

t"

e Curved and warped pan

bottoms.

Figure 2.

Note: The size and type of cookware used will influence the setting needed for best cooking

results.

Figure ]

•Flat bottom and straight sides.

® Tight fitting lids.

•Weight of handle does not tilt pan. Pan is well balanced.

•Pan sizes match the amount of food to be

prepared and the size of the surface element.

•Made of a material that conducts heat well.

•Easy to clean.

•Always match pot diameter to element surface diameter,

e Pan overhangs element by more than one-half inch.

•Pan is smaller than element.

® Heavy handle tilts pan.

Figure 2

Cookware Material types

The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are:

ALUMINUM - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining & pitting). If aluminum pans slide across the ceramic glass cooktop, they may leave metal marks which will resemble scratches. Remove these marks immediately.

COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see Aluminum above). STAINLESS STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.

CAST IRON - A poor heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached. Not recommended for use on ceramic cooktops.

PORCELAIN-ENAMEL on METAL - Heating characteristics will vary depending on base material. Porcelain-enamel coating must be smooth to avoid scratching ceramic cooktops.

GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass.

Before Setting the Oven Controls

Air Circulation in the Oven

If using I rack, place in center of oven. If using multiple racks, stagger

cookware as shown.

] Oven Rack

For best air circulation and baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides or back of the oven cavity. The hot air must circulate around the pans and cookware in the oven for even heat to reach around the food.

Multiple Oven Racks

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Orno Contents To reduce the risk of tipping, Read all instructions before using this applianceInstallation Attempt to tilt it forward. ReferYour Oven SELF-CLEANING Oven Models Clean Ventilating Hoods Frequently--GreaseRange Features Your electric range includesAbout the Radiant Surface Elements Before Setting Surface ControlsAbout the Ceramic Glass Cooktop Locations of the Radiant Surface ElementsSurface Cooking Settings Setting Surface ControlsOperating Single Radiant Surface Elements Setting Surface Controls contd Operating the Dual SurFace Radiant ElementSelecting Surface Cooking Cookware Before Setting the Oven ControlsSurface Cooking Cookware Material typesOven Vent Location Installing Oven Rack Supports in Upper OvenRemoving & Replacing Lower Oven Racks Arranging Oven Racks SupportsFor a silent control panel Control Pad FeaturesTemperature Visual Display Oven Control KeypadsDay Display To Set Add 1 Minute FeatureChanging Between 12 or Hour To Operate the Oven LightsTo Set Control for Continuous Bake or 12 Hour Energy Saving Setting Oven ControlsTo Set or Change the Temperature for Baking To Set Control for Oven LockoutTo Set the Delayed Bake Feature To Set the Timed Bake FeatureTo Program Oven for a Delayed Start Time Oven Baking Baking Problems and Solutions ChartProblems Incorrect pan sizeBroil To set Warm & Hold to turn on automatically Setting the Warm & Hold TM FeatureSetting Convection- Lower Oven Only To set the oven for ConvectionSetting Oven Controls Adjusting Oven Temperature To Adjust Oven TemperatureDo not Hand Clean Self-CleaningSelf=Cleaning Oven Ceanlng sectionWhen the Self-Clean Cycle is Completed What to Expect during CleaningSelf-Clean Cycle Time LengthSurfaces General Care & CleaningCleaning Various Parts of Your Oven VinylCleaning Recommendations for the Ceramic Glass Cooktop Ceramic Glass Cooktop Cleaning & MaintenanceIllustrated Aluminum Fall Changing the Oven LightTo replace the light bulb Removing and Replacing the Lower Oven Lift-OffDoor Surface unit does not Before you call for service, not the result of defectiveBefore You Call Or not hot enoughSolutions to Common Problems OccurrenceProtection Agreements Master Protection AgreementsCanada Your HomeOur Home Call anytime, day or night U.S.A. and Canada

790.9805 specifications

The Kenmore 790.9805 is a highly regarded oven that embodies a blend of modern technology, efficient cooking performance, and elegant design. This kitchen appliance stands out for its robust features, making it a top choice for home chefs and cooking enthusiasts alike.

One of the most notable features of the Kenmore 790.9805 is its spacious oven capacity. With a generous interior, it allows users to cook multiple dishes simultaneously, making it ideal for family meals or entertaining guests. The oven is equipped with a convection cooking system, which circulates hot air throughout the oven cavity. This technology ensures even cooking and consistent results, reducing cooking times and enhancing flavors.

The Kenmore 790.9805 also boasts a user-friendly control panel that provides ease of access to various cooking settings. With a digital display, users can easily set timers, temperature controls, and select cooking modes. The oven includes multiple cooking modes, such as bake, broil, and roast, giving users flexibility in preparing a wide range of dishes.

Moreover, this model features self-cleaning capabilities, ensuring that maintenance is hassle-free. The self-cleaning function uses high temperatures to burn off food residues, leaving the oven clean without the need for harsh cleaning chemicals. This feature is particularly beneficial for busy households where time is of the essence.

The design of the Kenmore 790.9805 aligns with modern aesthetics, boasting a sleek stainless steel finish that not only looks stylish but is also resistant to fingerprints and easy to clean. The oven’s design integrates seamlessly into any kitchen decor, enhancing the overall ambiance.

Safety features are also a priority in the Kenmore 790.9805. The appliance comes equipped with an automatic shut-off function and a cool-touch door, preventing burns and ensuring peace of mind while cooking.

Additional characteristics include adjustable oven racks, which provide customizable space for different cooking needs, as well as a range of accessories that enhance its functionality.

In conclusion, the Kenmore 790.9805 is a versatile and efficient oven that combines innovative technology with user-friendly features. Whether you're baking, roasting, or broiling, this oven delivers consistently excellent results, making it a valuable addition to any kitchen.
Top Page Image Contents