Kenmore Electric Range, PN 318205824A -1012 manuel dutilisation Setting Preheat, Setting Bake

Page 16

Setting Oven Controls

Setting Preheat

The Preheat pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550°F.

The following temperature settings apply to the preheat feature:

•Auto-suggest (default setting: 350°F / 177°C.

•Min. bake setting: 170°F / 77°C.

•Max. bake setting: 550°F / 288°C.

To set the Preheat

See example below to set a preheat to start immediately at 375°.

1.Arrange the interior oven racks.

2.Press Preheat.

3.Press 3, 7, 5.

4.Press Start.

To change Preheat temperature while oven is preheating

See example below to change from 375° to 425°.

1.Press Preheat. “375”.

2.Press 4, 2, 5.

3.Press Start.

“PRE” and the actual oven temperature shown in the display will alternate as the oven heats and reaches 375°F.

When the oven is finished preheating, the controls will beep and the “PRE” light will turn off and oven temperature will be displayed. If you missed hearing the beep, you can tell that the oven has reached preheat temperature if you see the oven temperature showing in the oven display. Once the oven has preheated, PLACE FOOD IN THE OVEN. The “BAKE” light will stay on.

Note

•To cancel the function, press Stop at any time when setting the control or during the cooking process.

•During the preheating, the convection fan will be activated to allow the oven to reach its target temperature faster. The Bake, Broil and Convection elements will also cycle for a better heat distribution.

Setting Bake

The BAKE pad controls normal baking. If preheating is necessary, refer to the Preheat Feature for instructions.

The following temperature settings apply to the bake feature:

•Auto-suggest (default setting): 350°F / 177°C.

•Min. bake setting: 170°F / 77°C.

•Max. bake setting: 550°F / 288°C.

To set the Bake

See example below to set a bake to start immediately at 375°.

1.Arrange interior oven racks and place food in oven.

2.Press Bake.

3.Press 3, 7, 5.

4.Press Start.

To change the Bake Temperature

See example below to change from 375° to 425°.

1.Press Bake.

2.Press 4, 2, 5.

3.Press Start.

Once START is pressed the oven will begin heating. The oven display shows the temperature rising.

After the oven reaches set temperature a beep will indicate the oven is ready. The oven will continue to maintain this temperature until the cooking feature is canceled.

Note

•To cancel the function, press Stop at any time when setting the control or during the cooking process.

•During the first rise of temperature, the convection fan will be activated to allow the oven to reach its target temperature faster. The Bake, Broil and Convection elements will also cycle for a better heat distribution.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Kenmore 318205824ATable of Contents Important Safety Instructions Important Instructions for Using Your Cooktop Important Instructions for Using Your Oven Slide-in Range Features Your Slide-in Range Features At a GlanceSetting Surface Controls About the Ceramic Glass CooktopAbout the Radiant Surface Elements Locations of the Radiant Surface Elements and ControlsSurface Cooking Settings Recommended Settings for Surface Elements Type of CookingTo Operate the Single Surface Elements Important notesTo Operate the Dual Surface Element Operating the Dual Surface Radiant ElementPlace correctly sized cookware on the dual surface element Setting Warmer Zone Warmer Zone Temperature SelectionWarmer Zone Recommended Food Setting Table Food Item To Set the Warmer Zone ControlEasy to clean Surface CookingSelecting Surface Cooking Cookware Cookware Material typesBefore Setting Oven Controls Oven Vent LocationRemoving and Replacing Oven Racks Arranging Oven RacksSetting Oven Controls Control Pad FunctionsSetting the Clock Setting Kitchen TimerSetting Continuous Bake or 12 Hour Energy Saving To Set Add 1 Minute FeatureSetting Oven Lockout Feature To Set the Cooktop Surface FeatureSetting Temperature Display Setting Silent Control OperationSetting Preheat Setting BakeSetting Cook Time Setting Delay Start with Cook TimeTo set the Cook Time feature To set the Delay Start with Cook Time featureSetting Convection Bake Benefits of Convection BakeFor best results To set the Convection BakeSetting Convection Roast Setting Convection ConvertTo set the Convection Roast Press Conv RoastSetting Broil To set the oven to broilSetting Warm Setting Slow CookTo set Warm To set Slow CookSetting the Recipes Setting Sabbath FeatureTo set the oven to record a recipe To recall a recipeAdjusting Oven Temperature To cancel Sabbath featureTo adjust the oven temperature higher To adjust the oven temperature lowerSelf-Cleaning Cycle Before Starting Self-CleanWhat to Expect during Cleaning Cancel pad. Wait until the oven is coolSelf-Clean Time Length When the Self-Clean Cycle is CompletedStopping or Interrupting a Self-Cleaning Cycle Door LOCKED, Clean and HOT icons will remain in the displayCleaning Various Parts of Your Range Care & Cleaning Cleaning ChartSurfaces How to Clean Cooktop Maintenance Care & CleaningCooktop Cleaning Cooktop Cleaning cont’d Removing and Replacing the Oven DoorTo Remove Oven Door To Replace Oven DoorStorage Drawer Changing Oven LightRemoving and Replacing Storage Drawer Solutions to Common Problems Before You CallAvoid Transportation Damage to your Range Baking Problems and Solutions Chart Baking Problems Causes CorrectionsCooking Information Oven BakingProtection Agreements Sears Parts & Repair Service Center SU-HOGAR
Top Page Image Contents