Kenmore PN 318205824A -1012 Setting Oven Lockout Feature, To Set the Cooktop Surface Feature

Page 15

Setting Oven Controls

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features

Setting Oven Lockout Feature

The Stop pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the display of the clock, the Kitchen Timer or the interior oven lights.

To activate the Oven Lockout feature

1.Press and hold Stop for 3 seconds.

2.After 3 seconds “door Loc” will appear, a beep will sound and “DOOR LOCKED” will flash in the display. Once the oven door is locked the “DOOR LOCKED” indicator will stop flashing and remain on along with the “Loc”.

To reactivate normal oven operation:

1.Press and hold Stop for 3 seconds. A beep will sound. The “DOOR LOCKED” will flash in the display until the oven door has completely unlocked.

2.The wall oven is again fully operational.

To Set the Cooktop Surface Feature

The pad is used to activate the Cooktop Lockout feature which will lock all surface elements from being accidentally turned ON. This feature will only lock the cooktop.

To turn the Cooktop Lockout Feature ON:

1.BE SURE ALL surface element controls are set to the OFF position.

2.Press and hold until one beep is heard. If a triple beep sounds instead, check all surface elements and turn them to the OFF position and repeat this step. The Cooktop

Locked icon will turn ON and the cooktop controls and functions are locked out until the cooktop is unlocked.

To turn the Cooktop Lockout Feature OFF:

1.BE SURE ALL surface element controls are set to the OFF position.

2.Press and hold until one beep is heard (after 3 seconds). If a triple beep sounds instead, check all surface elements

and turn them to the OFF position and repeat this step. The Cooktop Locked icon will turn OFF and the cooktop may be used normally.

Important notes:

-Starting a Self-Clean cycle will also turn ON the Cooktop Lockout feature. The cooktop will remain locked until the Self-Clean cycle has completed and the oven door has unlocked.

-If a power failure occurs after the Cooktop Lockout has been activated, you must turn OFF the Cooktop Lockout feature before being able to use the cooktop features again.

Setting Temperature Display

The Broil and Clean pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press Broil and hold for 7 seconds. If “F” appears, the display is set to show temperatures in Fahrenheit. If “C” appears, the display is set to show temperatures in Celsius.

2.Press Clean to switch between Fahrenheit or Celsius display modes. The display will show either “F” or “C”.

3.Press Start to accept the change or press Stop to reject the change.

Setting Silent Control Operation

The Delay Start and Clean pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

To change control from normal sound operation to silent control operation

1.To tell if your range is set for normal or silent operation press and hold Delay Start. “----” will appear and “DELAY” will flash in the display. After 7 seconds “bEEp On” will appear in the display.

2.Press Clean to switch between normal sound operation and silent operation mode. The display will show either “bEEp On” or “bEEp OFF”.

If “bEEp On” appears, the control will operate with normal sounds and beeps. If “bEEp OFF” appears, the control is in the silent operation mode.

3.Press Start to accept the change or press Stop to reject the change.

Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 318205824A KenmoreTable of Contents Important Safety Instructions Important Instructions for Using Your Cooktop Important Instructions for Using Your Oven Your Slide-in Range Features At a Glance Slide-in Range FeaturesLocations of the Radiant Surface Elements and Controls Setting Surface ControlsAbout the Ceramic Glass Cooktop About the Radiant Surface ElementsImportant notes Surface Cooking SettingsRecommended Settings for Surface Elements Type of Cooking To Operate the Single Surface ElementsOperating the Dual Surface Radiant Element To Operate the Dual Surface ElementPlace correctly sized cookware on the dual surface element To Set the Warmer Zone Control Setting Warmer ZoneWarmer Zone Temperature Selection Warmer Zone Recommended Food Setting Table Food ItemCookware Material types Easy to cleanSurface Cooking Selecting Surface Cooking CookwareArranging Oven Racks Before Setting Oven ControlsOven Vent Location Removing and Replacing Oven RacksControl Pad Functions Setting Oven ControlsTo Set Add 1 Minute Feature Setting the ClockSetting Kitchen Timer Setting Continuous Bake or 12 Hour Energy SavingSetting Silent Control Operation Setting Oven Lockout FeatureTo Set the Cooktop Surface Feature Setting Temperature DisplaySetting Bake Setting PreheatTo set the Delay Start with Cook Time feature Setting Cook TimeSetting Delay Start with Cook Time To set the Cook Time featureTo set the Convection Bake Setting Convection BakeBenefits of Convection Bake For best resultsPress Conv Roast Setting Convection RoastSetting Convection Convert To set the Convection RoastTo set the oven to broil Setting BroilTo set Slow Cook Setting WarmSetting Slow Cook To set WarmTo recall a recipe Setting the RecipesSetting Sabbath Feature To set the oven to record a recipeTo adjust the oven temperature lower Adjusting Oven TemperatureTo cancel Sabbath feature To adjust the oven temperature higherCancel pad. Wait until the oven is cool Self-Cleaning CycleBefore Starting Self-Clean What to Expect during CleaningDoor LOCKED, Clean and HOT icons will remain in the display Self-Clean Time LengthWhen the Self-Clean Cycle is Completed Stopping or Interrupting a Self-Cleaning CycleCare & Cleaning Cleaning Chart Cleaning Various Parts of Your RangeSurfaces How to Clean Care & Cleaning Cooktop MaintenanceCooktop Cleaning To Replace Oven Door Cooktop Cleaning cont’dRemoving and Replacing the Oven Door To Remove Oven DoorChanging Oven Light Storage DrawerRemoving and Replacing Storage Drawer Before You Call Solutions to Common ProblemsAvoid Transportation Damage to your Range Oven Baking Baking Problems and Solutions ChartBaking Problems Causes Corrections Cooking InformationProtection Agreements SU-HOGAR Sears Parts & Repair Service Center
Top Page Image Contents