Kenmore 790.7746, 790.7747, 790.7748, 790.7745 manual Important Safety Notice, Grounding instructions

Page 5

important Safety instructions

important Safety Notice

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances,

Grounding type wall receptacle

Do not, under any

circumstance, cut, remove, or bypass

the grounding prong.

Power supply cord

with 3=prong

grounding plug

Grounding instructions

(electric ignition models only)

Avoid fire hazard or electrical shock. Do not use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.

This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug.

For personal safety, the range must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded.

If a 2-prong

wall receptacle

is the only available outlet,

it is the

personal

iii

responsibility of the consumer to have it replaced with a properly grounded 3-

prong wall receptacle installed by a qualified electrician.

 

 

See the INSTALLATION

INSTRUCTIONS packaged

with this

range for

complete

installation

and grounding

instructions.

 

 

 

Conversion to Liquefied Petroleum Gas (or L.R Gas)

The natural gas range is designed to allow for conversion to

Personal injury or death from

electrical

Liquefied Petroleum (L.P.) Gas.

shock may occur

if the range is not installed

by a

 

qualified installer

or electrician.

 

If L.P. conversion is needed, contact your local L.P. gas provider for assistance. The L.P. Conversion Kit is provided with this appliance and is located on the left lower REAR (back side) panel of the range. Before installing the kit be sure to follow the L.P. Installation Instructions carefully.

Any additions, changes or conversions

required in order for this appliance to satisfactorily meet the application needs must be made by Sears Service.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Estufa a gas Serial Plate Location RecordFor Your Safety Important Safety instructionsIMPORTANT Instructions for Cleaning IMPORTANT iNSTRUCTiONS for UsingyourConversion to Liquefied Petroleum Gas or L.R Gas Important Safety NoticeGrounding instructions Master Protection Agreements Your Gas Range Features include Range FeaturesBefore Setting Oven Controls Setting Surface Controls Setting Surface ControlsSetting Proper Surface Burner Flame Size Operating the Gas Surface BurnersFor a silent control panel Temperature conversionTo Set the Clock Setting Oven ControlsTo Set the Minute Timer To Set or Change the Temperature for Baking Setting Oven Controls conrdTo Set Control for Continuous Bake or 12 Hour Energy Saving To Set Control for Oven Lockout LockoutContd Setting Oven ControlsTo Set the Timed Bake and Delay Stag Features To Operate the Oven Light To Set for BroilingHow Convection Cooking works some models Convection CookingGeneral Cooking Instructions To Set ConvectionSetting Warmer Drawer Controls Setting Oven Controls conrdSetting the Warm & Hold TM Feature To set Warm & HoldTo Remove Replace Warmer Warm & Ready TM Drawer some models Setting Warmer Drawer Controls contdWarmer Warm & Ready TM Drawer Indicator Light some models Self-Cleaning Oven Self-CleaningStopping or Interrupting a Select Self-Cleaning Cycle Self-Cleaning contdCleaning the Cooktop General Care & CleaningChanging the Oven Light General Care & Cleaning contdCap Possible Before You CallBefore You Call Possible CAUSE/SOLUTIONIii For repair = in your home lawn and garden equipment Canada Au Canada pour service en fran£ais
Top Page Image Contents