For a silent control panel

Oven Control Functions

READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyouroven, become familiar with the various pad functions of the oven as described below.

CLOCK SET		COOK	TiME
PAD--	Used	PAD--	Used to
to set	the	enter	the	length of
time of day.		the baking		time.

UP and DOWN ARROW PADS--Used along with the function pads to select oven temperature, cook time, start time (when programming an automatic start time), time of

day, clean time and minute timer.

BAKE PAD--Used to select the bake function.

FEATURE I NDICATOR

LIGHTS--These light to

OVEN iNTERIOR

LIGHT PAD Used to

turn oven interior	light
ON or OFF.	_

SELECTSELF-CLEAN PAD-- Used to select

the Self-Cleaning -- cycle. A 2, 3 or 4 hour Self-Clean time may be selected.

\., o \®

OOII

/ J	/
J J	/

show which feature is in use.

BROIL PAD--Used to select the variable broil function.

•		•
		WARM & HOLD PAD--
O		Used	to set the Warm &
........	,,,,) t	Hold	feature.

.JJ

		j"				/
TIMER	SET/OFF	PAD--	DELAY		START
Used	to set or cancel the		PAD--		Used to set
minute	timer. The	minute	the desired			start
timer does not start or stop			time	for	baking &
cooking. Also,			Self-Clean.			May	be
TIMER	SET/OFF	pad is	used	with		COOK
used to set the Continuous			TIME	to	program		a
Bake	feature.		delayed		bake cycle.
			delayed		bake cycle.

STOP/CLEAR

PAD--

OVEN, PREHEAT

& DOOR LOCKED

LIGHTS*

The "OVEN"

light

Used

clear

any

will glow each time

the oven

turns on to

maintain

the

set oven

function

previously

temperature. The "PREHEAT"

light

will

glow when

the oven

first

entered

except

the

time

set to operate, or if the desired

temperature

reset

higher than

the

of day and minute timer.

actual oven temperature. The

"DOOR

LOCKED"

light

will flash

Press

STOP/CLEAR

when the oven door locks and

unlocks

when

using

the Self-

stop

cooking.

Also

the

Clean cycle or the

oven door

lockout

activated.

The

indicator

light

STOP/CLEAR

pad

will glow constantly after the door locks.

used

activate oven

door

lockout setting.

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheaL This is n0rmal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your 0yen is ready:

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for

silent operation. Press and hold _p. After 7 seconds, the control will beep once. This will block the controls from

sounding when a pad is pressed. To return the sound, press and hold _p again for 7 seconds until the control beeps

once.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press _,o" "----" appears in the display.

2.Press and hold the A until "HI" appears in the display.

3.Press and hold B,o,until °F or oc appears in the display.

4.Press the A or V to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.