Kenmore 790.9446 manual Display, Stopping or interrupting a Self-Cleaning cycle

Self-Cleaning

Setting Flex Clean

Setting Delay Flex Clean

INSTRUCTIONS PRESS DISPLAY

When the Self=Clean cycle is done:

1.The time of day, "Hot, DOOR LOCKED" and "CLEAN" icon will remain in the display (See Fig. 7).

2.Once the oven has cooled down for approximately 1 HOUR, and

the "DOOR LOCKED" icon is no longer displayed, the oven	Fig.7
door can then be opened.

Stopping or interrupting a Self-Cleaning cycle:

if it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven:

1.	Press _.
2.	Once the oven has cooled down for approximately 1	HOUR and
	the "DOOR LOCKED" icon is no longer displayed,the	oven door	Fig.8
	can then be opened (Fig. 8).

iMPORTANT NOTES when using the Self-Clean feature:

1. The Self-Clean feature will not operate whenever a radiant surface remains ON.

iii...........

2. A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be started if Oven Lockout feature is active.

3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. Once power is restored, set for another Self-Clean cycle to finish.

4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for the 24 hour time of day display mode.

33