Self-Cleaning
•Setting Flex Clean
•Setting Delay Flex Clean
INSTRUCTIONS | PRESS | DISPLAY |
When the Self=Clean cycle is done:
1.The time of day,"Not, DOOR LOCKED" and "CLEAN" icon will remain in the display (See Fig. 7).
2.Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven | Fig.7 |
door can then be opened. |
|
Stopping or Interrupting a Self=Cleaning cycle:
If it becomes necessary to stop or interrupt a
1. | Press_. |
|
2. | Once the oven has cooled down for approximately 1 HOUR and |
|
| the "DOOR LOCKED" icon is no longer displayed,the oven door | Fig.8 |
| can then be opened (Fig. 8). |
|
IMPORTANT NOTES when using the
iii...........
1. Do not use the surface burners after setting for a
..........iii
2.A Self=Clean cycle cannot be started if Oven Lockout feature is active.
3.If a
4.If your clock is set for normal 12 hour display mode the Delay Self=Clean cycle can never be set to start more than 12 hours in advance. To set for Delay
24hour time of day display mode.
33