Kenmore 790. 7862 manual Oven Control Functions, Setting Oven Controls, Temperature conversion

Oven Control Functions

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with

the various pad functions of the oven as described below.

BROIL PAD— Used to	UP and DOWN ARROW PADS— Used along	FEATURE INDICATOR
select the variable broil	with the function pads to select oven
		LIGHTS— These light to
function.	temperature, time of day, clean time and
		show which feature is in
CLOCK SET	minute timer.
		use.
PAD— Used
to set the
time of day.

TIMER ON/OFF PAD— Used to set or cancel the minute timer. The minute timer does not start or stop cooking. Also,

TIMER ON/OFF pad is used to set the Continuous Bake feature.

SELECT SELF-CLEAN

PAD— Used to select the

Self-Cleaning cycle. A 2,

3or 4 hour Self-Clean time may be selected.

OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the Self- Clean cycle or the oven door lockout is activated. The indicator light will glow constantly after the door locks.

BAKE PAD—Used to select the bake function.

STOP/CLEAR PAD— Used to clear any function previously entered except the time of day and minute timer. Press STOP/CLEAR to stop cooking. Also the STOP/CLEAR pad is used to activate Oven Lockout setting.

ENGLISH

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven is ready.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press . "— —" appears in the display.

2.Press and hold the until "HI" appears in the display.

3.Press and hold until °F or °C appears in the display.

4.Press the or to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

Setting Oven Controls

Note: The time of day must first be set in order to operate the oven.

To Set the Clock

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1.Press once (do not hold pad down).

2.Within 5 seconds, press and hold the or until

the correct time of day appears in the display.

Note: The clock cannot be changed during a Self-Clean cycle.

To Set the Minute Timer:

1. Press .

2.Press the to increase the time in one minute

increments. Press and hold the to increase the

time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If the pad is pressed first, the timer will advance to 11 hours and 59 minutes.

3.The display shows the timer countdown in minutes until 1 minute remains. Then the display will countdown in seconds.

4.When the set time has run out, the timer will beep 3 times and will continue to beep 3 times every 60

seconds until is pressed.

9