Kenmore 790. 7841, 790. 7840, 790. 7830 manual Changing oven temperature display mode, Oven Lockout

Page 14

Setting Oven Controls

Changing oven temperature display mode

The oven control is preset to display °F (Fahrenheit) when

shipped from the factory. The control can be changed to display either Fahrenheit or Celsius.

Example m To change the temperature to display °C (Celsius) or °F (Fahrenheit):

1.Press and hold Broil keypad for 6 seconds.

2.Press Flex Clean keypad to toggle between Fahrenheit or Celsius temperature display modes (Figs. 1 & 2).

3.Press to accept choice.

Important note:

The oven temperature display cannot be modified during any active oven cooking or cleaning function.

Oven Lockout

OVEN

LOCKOUT

The control may be programmed to lock the oven door and lock the oven control keypads.

To activate the Oven Lockout feature:

1.Be sure oven door is completely closed.

2.Press and hold the OVEN LOCKOUT keypad for 3 seconds, door Loc (See Fig. 5) will appear in the display. The motor driven door latch mechanism will begin

locking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to

completely lock. Once the oven door is locked, the Loc will appear in the display (See Fig. 6).

Fig. 1

Fig. 2

Setting silent or audible control mode

Silent mode allows the oven control to operate without audible tones. The control may be programmed for silent operation and later returned to operating with all the normal audible tones.

Example m To set for silent or audible mode:

1.Press and hold Delay Start keypad for 6 seconds.

2.Press Flex Clean keypad to toggle between beep on or beep off. (See Figs. 3 & 4).

3.Press STARTto accept choice.

Fig. 3

Fig. 4

Fig. 5

Fig. 6

To cancel the Oven Lockout feature:

1.Press and hold the OVEN LOCKOUT keypad for 3 seconds. The motor driven door latch mechanism will

begin unlocking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely unlock.

2.When the Loc message (Fig. 6) is no longer displayed, the oven door may be opened and the oven control keypads will be available for use.

Important notes:

•To avoid possible damage to the oven door latching mechanism, do not attempt to open or close the oven door whenever the door Loc message is displayed.

•If a control keypad is pressed when OVEN LOCI(OUT is active, the control may triple beep indicating the keypad action is not available when the OVEN LOCI(OUT feature is active.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Ienmore Elite Kenmore Elite Limited Warranty Table of ContentsSave these instructions for future reference Serious injuryImportant Safety Instructions IgniteImportant safety notice COOlTOPGrounding Instructions Product RecordSerial Plate Location Conversion to L.P. GasRange Features Your gas range features includeRemoving, replacing and arranging oven racks Before Setting Oven ControlsTypes of oven racks Air circulation in the ovenSetting proper burner flame size Before Setting Surface ControlsUsing proper cookware Cookware material typesSetting Surface Controls Setting surface burnersOperating the Double Ring Burner Setting Double Ring Burner some modelsHome canning IDo not place flammable items such asOven Control Functions Minimum & maximum control settingsFeature Oven control keypadsSetting Timer Setting Oven ControlsSetting Clock Setting 12 or 24 hour display modeOven Lockout Changing oven temperature display modeSetting silent or audible control mode Press 4 5 0 using numeric keypads Setting PreheatSetting Bake Example To set Bake with default oven temperature 350FWhen the programmed cook time runs out Setting Cook TimeSetting Delay Start Suggestions for Convection baking Example m To set Conv Bake with a default oven setConv Bake Suggestions for Conv Roast Cony RoastConv Convert 1st side Suggested broil settings table gas ovenBroil ThickCakes Breads Meat probe some modelsMeat probe contd To set meal probeSetting Slow Cook Some tips for best results when using Slow CookExample m To set Warm & Hold Setting Oven Controls Warm & Hold TMRecipe Recall Accent light Example To adjust Accent light brightnessOperating oven lights Example m To restore to factory default settings Adjusting oven temperatureRestoring factory default settings Sabbath feature for use on the Jewish ModesExample m To turn off the Sabbath feature Arranging warmer drawer rack positions Warmer DrawerWarm & Ready TM drawer some models Warmer drawer controls Warmer drawer settingsWarmer drawer recommended food settings Food To set warmer drawerTo set Proof Bread using warmer drawer Proof BreadSee Fig Removing and replacing the warmer drawerDrawer To replace the warmer drawerFlex Clean Setting Flex CleanIf it becomes necessary to stop Flex Clean when active Delayed Start Flex CleanWhen Flex Clean is finished Care & Cleaning Cleaning recommendationCleaning surface burner heads Cleaning the cooktop and surface burnersCleaning burner caps To clean the burner head ignition portsReplacing oven lights General cleaningAluminum foil and utensils Roller Pin Removing and replacing the lift-off oven doorSpecial door care instructions Setting SolutionAppliance connector Installed Is notSection See Cleaning Protection Agreements Acuerodes de proteccibnSears Parts & Repair Service Center Iiiiiiii

790. 7841, 790. 7830, 790. 7840 specifications

The Kenmore 790 series of appliances, particularly models 7840, 7830, and 7841, represents a blend of advanced technology and user-friendly design in kitchen ranges. Known for their reliability, these ranges come with several standout features and characteristics that cater to a modern cooking experience.

One of the defining features of the Kenmore 790 series is the powerful oven performance. Each model is equipped with a precise oven temperature control system that ensures your dishes are cooked evenly. The range often includes multiple cooking modes, such as bake, broil, and roast, allowing users to adapt their cooking methods to a variety of recipes. The convection baking feature in some models enhances heat distribution, reducing cooking times while ensuring that food develops a perfect golden-brown crust.

The cooktop of the Kenmore 790 series showcases versatility, often featuring a combination of sealed burners that provide quick and efficient heating. With different burner sizes, users have the flexibility to adjust for various cooking needs, from simmering delicate sauces to boiling large pots of water. Certain models include a high-output burner, which is ideal for stir-frying or searing meats, making it a favorite among culinary enthusiasts.

In terms of design, the Kenmore 790 ranges present a sleek and modern aesthetic. Stainless steel finishes not only add elegance to the kitchen but also ensure durability and ease of cleaning. The intuitive control panel often features digital displays and touch controls, allowing for easy navigation of settings and timers.

Safety is also a priority with the Kenmore 790 models, which include features like an automatic shut-off function that provides peace of mind during cooking. Many models come with a self-cleaning option, simplifying maintenance by using high temperatures to burn off food residues.

Another impressive characteristic of the 790 series is its energy efficiency. These ranges are designed to reduce energy consumption without compromising performance, making them a smart choice for environmentally conscious consumers.

Overall, the Kenmore 790 series, including models 7840, 7830, and 7841, offers reliable performance, versatility, and modern features that enhance any kitchen experience. They embody Kenmore’s commitment to quality and innovation, making them an excellent choice for home cooks seeking both functionality and elegance.
Top Page Image Contents