Kenmore 790. 7830 Removing and replacing the lift-off oven door, Special door care instructions

Page 37

Care & Cleaning

Removing and replacing the lift-off oven door

To avoid possible injury when removing or replacing the oven door, follow the instructions below carefully and always hold the oven door with both hands positioned away from the door hinge area.

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

To remove oven door:

1.Open oven door completely (horizontal with floor - Fig.l).

2.Pull the door hinge locks on both left and right door hinges

down from the oven frame completely towards the oven door (Fig. 2). A tool such as a small flat-blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - Fig. 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (Fig. 4).

To replace oven door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - Fig. 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (Fig. 4). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door (horizontal with floor - Fig. 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (Fig. 2) to the locked position; then close the oven door.

Special door care instructions

Most oven doors contain glass that can break. Read the following recommendations:

•Do not close the oven door until all the oven racks are fully in place inside the oven cavity.

•Do not hit the glass with pots, pans, or any other object.

•Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Oven door

hinge

locations

t

\

Fig. 1

Fig. 2

oven

door

door/

hinge

Fig. 3

roller

pin

hinge

arm

hook

Fig. 4

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Ienmore Elite Table of Contents Kenmore Elite Limited WarrantySerious injury Save these instructions for future referenceIgnite Important Safety InstructionsCOOlTOP Important safety noticeSerial Plate Location Product RecordGrounding Instructions Conversion to L.P. GasYour gas range features include Range FeaturesTypes of oven racks Before Setting Oven ControlsRemoving, replacing and arranging oven racks Air circulation in the ovenUsing proper cookware Before Setting Surface ControlsSetting proper burner flame size Cookware material typesSetting surface burners Setting Surface ControlsHome canning Setting Double Ring Burner some modelsOperating the Double Ring Burner IDo not place flammable items such asFeature Minimum & maximum control settingsOven Control Functions Oven control keypadsSetting Clock Setting Oven ControlsSetting Timer Setting 12 or 24 hour display modeSetting silent or audible control mode Changing oven temperature display modeOven Lockout Setting Bake Setting PreheatPress 4 5 0 using numeric keypads Example To set Bake with default oven temperature 350FSetting Delay Start Setting Cook TimeWhen the programmed cook time runs out Conv Bake Example m To set Conv Bake with a default oven setSuggestions for Convection baking Conv Convert Cony RoastSuggestions for Conv Roast Broil Suggested broil settings table gas oven1st side ThickMeat probe some models Cakes BreadsTo set meal probe Meat probe contdSome tips for best results when using Slow Cook Setting Slow CookRecipe Recall Setting Oven Controls Warm & Hold TMExample m To set Warm & Hold Operating oven lights Example To adjust Accent light brightnessAccent light Restoring factory default settings Adjusting oven temperatureExample m To restore to factory default settings Modes Sabbath feature for use on the JewishExample m To turn off the Sabbath feature Warm & Ready TM drawer some models Warmer DrawerArranging warmer drawer rack positions Warmer drawer recommended food settings Food Warmer drawer settingsWarmer drawer controls To set warmer drawerProof Bread To set Proof Bread using warmer drawerDrawer Removing and replacing the warmer drawerSee Fig To replace the warmer drawerSetting Flex Clean Flex CleanWhen Flex Clean is finished Delayed Start Flex CleanIf it becomes necessary to stop Flex Clean when active Cleaning recommendation Care & CleaningCleaning burner caps Cleaning the cooktop and surface burnersCleaning surface burner heads To clean the burner head ignition portsAluminum foil and utensils General cleaningReplacing oven lights Special door care instructions Removing and replacing the lift-off oven doorRoller Pin Appliance connector Installed SolutionSetting Is notSection See Cleaning Acuerodes de proteccibn Protection AgreementsIiiiiiii Sears Parts & Repair Service Center

790. 7841, 790. 7830, 790. 7840 specifications

The Kenmore 790 series of appliances, particularly models 7840, 7830, and 7841, represents a blend of advanced technology and user-friendly design in kitchen ranges. Known for their reliability, these ranges come with several standout features and characteristics that cater to a modern cooking experience.

One of the defining features of the Kenmore 790 series is the powerful oven performance. Each model is equipped with a precise oven temperature control system that ensures your dishes are cooked evenly. The range often includes multiple cooking modes, such as bake, broil, and roast, allowing users to adapt their cooking methods to a variety of recipes. The convection baking feature in some models enhances heat distribution, reducing cooking times while ensuring that food develops a perfect golden-brown crust.

The cooktop of the Kenmore 790 series showcases versatility, often featuring a combination of sealed burners that provide quick and efficient heating. With different burner sizes, users have the flexibility to adjust for various cooking needs, from simmering delicate sauces to boiling large pots of water. Certain models include a high-output burner, which is ideal for stir-frying or searing meats, making it a favorite among culinary enthusiasts.

In terms of design, the Kenmore 790 ranges present a sleek and modern aesthetic. Stainless steel finishes not only add elegance to the kitchen but also ensure durability and ease of cleaning. The intuitive control panel often features digital displays and touch controls, allowing for easy navigation of settings and timers.

Safety is also a priority with the Kenmore 790 models, which include features like an automatic shut-off function that provides peace of mind during cooking. Many models come with a self-cleaning option, simplifying maintenance by using high temperatures to burn off food residues.

Another impressive characteristic of the 790 series is its energy efficiency. These ranges are designed to reduce energy consumption without compromising performance, making them a smart choice for environmentally conscious consumers.

Overall, the Kenmore 790 series, including models 7840, 7830, and 7841, offers reliable performance, versatility, and modern features that enhance any kitchen experience. They embody Kenmore’s commitment to quality and innovation, making them an excellent choice for home cooks seeking both functionality and elegance.
Top Page Image Contents