Kenmore 790. 7840, 790. 7830, 790. 7841 manual Meat probe contd, To set meal probe

Page 21

Setting Oven Controls

Meat probe (cont'd)

Important note:

Changing how the oven reacts after reaching the target temperature must be done before starting the cooking process.

To set meal probe:

1.Prepare the food and properly insert the temperature probe into the food. DO NOT preheat or start cooking before properly inserting the meat probe. The probe should be inserted into the food and receptacle while the oven is still cool.

2.Place the prepared food on the desired oven rack position and slide into the oven.

3.Plug the meat probe into the probe receptacle located on the left front oven cavity side (See Fig. 1 for location of probe receptacle).

4.The oven control detects if the meat probe is correctly plugged in to receptacle and when recognized will

illuminate the/_ icon in the oven control display.

5.To set the target temperature press Meat Probe keypad once then enter the desired target internal temperature using the numeric key pads (default setting is 170°F/

77°C)t. Press STARTto accept the meat probe target temperature. Close the oven door.

6.Set the oven control for Bake, Conv Bake or Conv Roast and the desired oven temperature. You may use the meat probe with some other baking features, but the meat probe cannot be set with Broil or Flex-Clean.

7.During the cooking process the actual meat probe temperature will display by default. To view the target

temperature press the Meat Probe keypad once. After 6 seconds the display will show the actual meat probe temperature. If the target temperature needs to be changed during the cooking process, press the Meat Probe keypad once and use the numeric keypads to

adjust the target temperature. Press the STARTkey to accept any change.

8.The oven control will provide 3 beeps when the internal target temperature is reached. By default the oven will

automatically change to a Warm & Hold setting. The Warm & Hold function will maintain the oven temperature at 170 ° F (77°C). Instructions for changing how the oven reacts after reaching the internal target temperature may be found later in this section.

Press STOPto cancel cooking at any time.

Fig. 1

See the following Instructions for changing how the oven reacts after reaching the internal target temperature.

To set the oven to continue cooking after reaching the probe target temperature:

1.Press Meat Probe keypad and hold for 6 seconds.

2.Press Flex Clean keypad and toggle until the "Continu" message appears (Fig. 2) then press STARTto accept.

To set the oven to cancel cooking and automatically start

Warm & Hold after reaching the probe target

temperature:

. Press Meat Probe keypad and hold for 6 seconds.

2.Press Flex Clean keypad and toggle until "CANCEL" message appears (Fig. 3) then press STARTto accept.

Fig. 2

Fig. 3

The U.S. Department of Agriculture states, "Rare fresh beef is popular, but you should know that cooking it to only 140°F/60°C means some food poisoning organisms may survive." (Source: Safe Food Book, Your Kitchen Guide, USDA Rev. June 1985.)

The lowest temperature recommended by the USDA is 145°F/63°C for medium rare fresh beef.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Ienmore Elite Table of Contents Kenmore Elite Limited WarrantySerious injury Save these instructions for future referenceIgnite Important Safety InstructionsCOOlTOP Important safety noticeSerial Plate Location Product RecordGrounding Instructions Conversion to L.P. GasYour gas range features include Range FeaturesTypes of oven racks Before Setting Oven ControlsRemoving, replacing and arranging oven racks Air circulation in the ovenUsing proper cookware Before Setting Surface ControlsSetting proper burner flame size Cookware material typesSetting surface burners Setting Surface ControlsHome canning Setting Double Ring Burner some modelsOperating the Double Ring Burner IDo not place flammable items such asFeature Minimum & maximum control settingsOven Control Functions Oven control keypadsSetting Clock Setting Oven ControlsSetting Timer Setting 12 or 24 hour display modeChanging oven temperature display mode Setting silent or audible control modeOven Lockout Setting Bake Setting PreheatPress 4 5 0 using numeric keypads Example To set Bake with default oven temperature 350FSetting Cook Time Setting Delay StartWhen the programmed cook time runs out Example m To set Conv Bake with a default oven set Conv BakeSuggestions for Convection baking Cony Roast Conv ConvertSuggestions for Conv Roast Broil Suggested broil settings table gas oven1st side ThickMeat probe some models Cakes BreadsTo set meal probe Meat probe contdSome tips for best results when using Slow Cook Setting Slow CookSetting Oven Controls Warm & Hold TM Recipe RecallExample m To set Warm & Hold Example To adjust Accent light brightness Operating oven lightsAccent light Adjusting oven temperature Restoring factory default settingsExample m To restore to factory default settings Modes Sabbath feature for use on the JewishExample m To turn off the Sabbath feature Warmer Drawer Warm & Ready TM drawer some modelsArranging warmer drawer rack positions Warmer drawer recommended food settings Food Warmer drawer settingsWarmer drawer controls To set warmer drawerProof Bread To set Proof Bread using warmer drawerDrawer Removing and replacing the warmer drawerSee Fig To replace the warmer drawerSetting Flex Clean Flex CleanDelayed Start Flex Clean When Flex Clean is finishedIf it becomes necessary to stop Flex Clean when active Cleaning recommendation Care & CleaningCleaning burner caps Cleaning the cooktop and surface burnersCleaning surface burner heads To clean the burner head ignition portsGeneral cleaning Aluminum foil and utensilsReplacing oven lights Removing and replacing the lift-off oven door Special door care instructionsRoller Pin Appliance connector Installed SolutionSetting Is notSection See Cleaning Acuerodes de proteccibn Protection AgreementsIiiiiiii Sears Parts & Repair Service Center

790. 7841, 790. 7830, 790. 7840 specifications

The Kenmore 790 series of appliances, particularly models 7840, 7830, and 7841, represents a blend of advanced technology and user-friendly design in kitchen ranges. Known for their reliability, these ranges come with several standout features and characteristics that cater to a modern cooking experience.

One of the defining features of the Kenmore 790 series is the powerful oven performance. Each model is equipped with a precise oven temperature control system that ensures your dishes are cooked evenly. The range often includes multiple cooking modes, such as bake, broil, and roast, allowing users to adapt their cooking methods to a variety of recipes. The convection baking feature in some models enhances heat distribution, reducing cooking times while ensuring that food develops a perfect golden-brown crust.

The cooktop of the Kenmore 790 series showcases versatility, often featuring a combination of sealed burners that provide quick and efficient heating. With different burner sizes, users have the flexibility to adjust for various cooking needs, from simmering delicate sauces to boiling large pots of water. Certain models include a high-output burner, which is ideal for stir-frying or searing meats, making it a favorite among culinary enthusiasts.

In terms of design, the Kenmore 790 ranges present a sleek and modern aesthetic. Stainless steel finishes not only add elegance to the kitchen but also ensure durability and ease of cleaning. The intuitive control panel often features digital displays and touch controls, allowing for easy navigation of settings and timers.

Safety is also a priority with the Kenmore 790 models, which include features like an automatic shut-off function that provides peace of mind during cooking. Many models come with a self-cleaning option, simplifying maintenance by using high temperatures to burn off food residues.

Another impressive characteristic of the 790 series is its energy efficiency. These ranges are designed to reduce energy consumption without compromising performance, making them a smart choice for environmentally conscious consumers.

Overall, the Kenmore 790 series, including models 7840, 7830, and 7841, offers reliable performance, versatility, and modern features that enhance any kitchen experience. They embody Kenmore’s commitment to quality and innovation, making them an excellent choice for home cooks seeking both functionality and elegance.
Top Page Image Contents