Kenmore 790. 9021 Removing and replacing the lift-offoven door, Special door care instructions

Page 22

Care & Cleaning

Removing and replacing the lift-offoven door

To avoid possible injury when removing or replacing the oven door, follow the instructions below carefully and always hold the oven door with both hands positioned away from the door hinge area.

The door is heavy. For safe, temporary storage, lay the door fiat with the inside of the door facing down.

To remove oven door:

1.Open oven door completely (horizontal with floor - Fig.l).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (Fig. 2). A tool such as a small flat-blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - Fig. 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (Fig. 4).

To replace oven door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - Fig. 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (Fig. 4). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door (horizontal with floor - Fig. 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (Fig. 2) to the locked position; then close the oven door.

Special door care instructions

Most oven doors contain glass that can break. Read the following

recommendations:

"Do not close the oven door until all the oven racks are fully in place inside the oven cavity.

"Do not hit the glass with pots, pans, or any other object.

"Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

\

Fig. 1

 

Fig. 2

//

/

oven

Fig. 3

hinge

arm

hook

Fig. 4

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Kenmore Contents Kenmore Limited WarrantyDefinitions Important Safety nstructionsBrackets/screws, or any other part of the range Foil to llne IMPORTANT iNSTRUCTiONS for Using YourLiners BottomCooktop Product Record Serial Plate LocationSave these instructions for future reference Types of oven racks Before Setting Oven ControlsRemoving, replacing and arranging racks Air circulation in the ovenUsing proper cookware Before Setting Surface ControlsElement On indicator lights Before Setting Surface Controls Home CanningSurface element settings Setting Surface ControlsImportant notes Oven Control Functions Setting Oven ControlsSetting Clock Oven control keypadsHour Energy Saving feature Changing temperature display F or CChanging between continuous bake setting or Setting TimerSetting Bake Setting Oven ControlsOven Lockout 6th BroilSuggested OvenAdjusting Oven Temperature Read before starting Select Clean Select CleanSetting Select Clean To set Select Clean to start immediatelyIf it becomes necessary to stop Select Clean when octlve When Select Cleon is finishedImportont notes Oven door Care & CleaningCleaning recommendation Surface elements and drip General cleaning Aluminum foil and utensilsTo remove the surface elements and drip bowls Cleaning drip bowlsSurface elements and drip bowls To replace drlp bowls and surface elementsRaising and lowering the cooktop some models Replacing oven light some modelsTo replace oven door Removing and replacing the lift-offoven doorSpecial door care instructions RecommendationsSolution Before You CaJl Solutions to common problemsProblem See Replacing oven lightProblemSolution Before You Call Solutions to common problemsWith Before You Call Solutions To common Problems Page Protection Agreements Managemylife Call anytime, day or night U.S.A. and Canada
Top Page Image Contents