Self-Cleaning
iNSTRUCTiONS | PRESS | DISPLAY |
Stopping or interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a
1. Press Q.
2. Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED'" icon is no longer displayed, the oven door can then be opened (Figure 1).
Figure 1
Note:
Adjusting Oven Temperature
The temperature in the oven has been
iNSTRUCTiONSPRESS
To adjust the oven temperature higher
1.Press \B_k_,)for 6 seconds (Figure 2).
2.To increase the temperature use the number pads to enter the
desired | change. (Example 30°F) _ | @ | (Figure 3). The | _ | @ | ||
temperature may be increased as much as 35°F (19°C). |
|
| |||||
3. Press | to accept | the temperature | change | and the display will |
| or | |
return to the time of day | (Figure 4). Press | _to | reject the |
|
| ||
change | if necessary. |
|
|
|
|
|
|
Note: The oven
temperature adjustments made with this feature will
not change the Self-Clean cycle temperature or the Broiltemperature.
DISPLAY........iii
Figure 2
Figure 3
To adjust the oven temperature lower
1 Press/"_B_ke''' for 6 seconds• 0° will appear in the display (Figure 5).
2.To decrease the temperature use the number pads to enter the
desired change. (Example
3.Press : _STARto: accept the temperature change and the display will
Q@@
;START' or
Figure 4
Figure 5
return to the time of day (Figure 7). Press _ | to reject the | @ |
change if necessary, |
|
|
Note: The oven temperature adjustments are permanent and will stay forever in the unit memory unless you manually change it again, Even a power outage will not reset these changes. Follow the same procedure again if you wish to change it to a different setting,
Figure 6
Figure 7
37