Kenmore 790. 9802 Setting the Clock, Instructions PR ESS, To set the clock example below for

Setting the Clock

Setting the Clock

The _ pad is used to set the clock. The clock may be set for 12 or 24 hour time of day

v

operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.

Press _. The display will stop flashing,

INSTRUCTIONS PR ESS

To set the clock (example below for 1:30)

1. Press ("'_, "CLO" will appear in the display (Fig. 1). (_

,Press (_) ____ (_ pads to set the time of day to 1:30 (Fig. 2).

Press _. The time of day will appear in the display (Fig. 3).

Changing		between		12 or 24 hour time		of day display
1.	Press	and	hold _	for 7 seconds	until "12h" or "24h" appears
	in the	display.
2.	Press	_	to switch	between the	12 and	24 hour time of day		_
	display. The display will show either "12h" (Fig. 4) or "24h" (Fig.
	5).	_				f'-_	@	or

3.Press (,_TAR_to accept the change or press (STOP)to reject the

v v

change.

4.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

DISPLAY

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

15