Kenmore 9743678, 9743680, 9743679, 9744231 dimensions Frompage8, Metal cabinet Cover hole with

continuedfrompage8

1

Cut a 3/4" (1.9cm) hole (_ in right-hand cabinet side, rear or floor. Optional locations are shown.

Wood cabinet: Sand hole until smooth.

Metal cabinet: Cover hole with

Grommet (Part No. 302797) available from your Sears store or service center.

Run wire into house wiring junction

4.box. Use strain relief method provided with junction box. If no strain relief is provided, install a U.L.-listed/CSA- certified clamp connector for flexible- type wire. If installingconduit, attach a U.L.-listed/CSA-certified conduit connector to junction box.

m

Run other end of wire through cabinet hole. Cable must extend to the right front of cabinet opening. Go to step 6.

6"(15,2cm)

Cut a 1-1/2" (3.8cm) hole _) in right- hand cabinet rear or side. Optional locations are shown.

Wood cabinet: Sand hole until smooth.

Metal cabinet: Cover hole with Grommet (Part No. 302797) available from your Sears store or service center.

Install a mating, three-prong,

4a,grounding-type wall receptacle _ in the cabinet next to the dishwasher opening. Go to step 6.

9