Kenmore 9743680, 9743679, 9743678, 9744231 dimensions Water Connection, Compressiom. s

Page 20

cont_nuedfrompage18

Water Connection

HELPFUL TIP:

Compressiom. _s:

3.Slide nut O onto €opper tubing

• about I inch (2.5cm).

2. Slide lermle (_) onto the tubing,

@Do net poaltion lermle on the end of the tubing,

3.Pet the tubing into the elbow 0 as far as it will go.

4.Slide the nut and ferrule forward

and start the net onto the elbow

threads0. b carefalwhen handbaga.d posmonb_the coppertubing.R _nds and

kinks easily,

HELPFUL TIP:

Hold water valve mounting bracket with pliers while attaching copper tubing.

To preventvibrationduringoperation, routethe watersupplyhne so that it does not touch the dishwasherbase, frame or motor

With copper tubing _ pushed _nto

compression fitting as far as it will go, use an adjustable wrench and tighten compression fitting nut 0 to elbow O on water inlet valve

19

Image 20
Contents Undercounter Dishwasher Doing so willPage Parts supplied Cabinet opening Helpful TIP We recommend Time-delay fuse or circuit breaker ElectricalWater Drain4K2461cm Disconnect the power supply. Turn water off ElectricalFrompage8 Metal cabinet Cover hole withWater line Drain hose 11c 11d Put dtshwasher corner posts 0 behind If you are installing a power supply Frompage14 Remove cardboard from under dishwasher Electrical Connection Tightenclampconnectororconduit connectorscrews Water Connection Compressiom. sDrain Connection Water supply and checkfor leaksDII If dishwasher does not operate If you have installation questions To customizeyourdishwasher