2a Fuse, ON-OFF Switch, Input Jack | Peavey PV215D specification

have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always be sure that the mixer and all other associated equipment are properly grounded.

2a FUSE

The unit is AC power line fuse protected from overloads and fault conditions with a slow-blow 5 x 20mm 250V fuse. This fuse is located within the cap of the fuse enclosure just to the left of the ON-OFF switch. If the fuse fails, THE FUSE MUST BE REPLACED WITH THE SAME TYPE AND VALUE IN ORDER TO AVOID DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY!

The fuse in the PV® 1215D can be replaced with a time-delay type 5 x 20 mm size 250V rated fuse.

For 100-120VAC operation, a fuse rated at 6.3 amps should be used. In the USA, types GDC, GMC, 215, 218, and 477 cartridge-style 5 x 20 mm size fuses with a 6.3 amp 250V rating can be used.

For 220-240VAC operation, a fuse rated at 3.15 amps and 250V should be used, which conforms to the international fuse classification "T3.15AL".

If the unit continues to blow replacement fuses, do not keep replacing them- it should be taken to a qualified service center for repair.

To replace the fuse, be sure to remove the IEC power cord from the IEC socket (2).

Remove the cap to the fuse enclosure (2a) using a flat blade screwdriver tip inserted into the fuse cap slot. Push the cap in and turn the cap CCW and pull the cap out. The blown fuse should come out with the cap. Remove the blown fuse and replace it with the proper type per instructions previously supplied. Then, once the new fuse has been put in place, re-insert the fuse enclosure cap, push in and turn the cap CW, and make sure it is fully seated. Before re-attaching the IEC power cord to the IEC socket, make sure the Power switch is in the OFF position, so that intermittent contact of the IEC cord while it is being connected will not unduly stress the amplifier or the fuse. Now re-attach the IEC power cord, and you can then use the Power switch to turn the unit on.

3ON-OFF SWITCH

This rocker switch supplies AC power to the PV®215D when switched to the ON position.

T O P P A N E L

215D

4INPUT JACK

The line level input is of the medium impedance balanced type. Jack (4) is a combo female XLR and 1/4” TRS

connector, and can be supplied a balanced or unbalanced input signal.

PV215D specifications

The Peavey PV215D is a powerful and versatile dual 15-inch loudspeaker system designed to deliver exceptional sound quality for live performances, events, and installations. Renowned for its robust construction and advanced technologies, the PV215D appeals to musicians, sound engineers, and venue owners seeking reliability and performance in one package.

One of the standout features of the PV215D is its dual 15-inch heavy-duty woofer configuration, which is engineered to produce deep, resonant bass and clear mids. This design allows the speaker to handle a wide frequency range, ensuring that every note is delivered with precision and clarity. The inclusion of a high-frequency compression driver ensures the production of crisp highs, further enhancing the speaker's versatility in various sound applications.

At the heart of the PV215D is Peavey's proprietary technology that improves sound dispersion. The speaker features a unique horn design that optimally distributes sound throughout the venue, significantly minimizing dead spots and providing a more uniform listening experience. This technology makes the PV215D ideal for larger spaces, whether in outdoor festivals or indoor concert halls.

Durability is a key consideration for any professional audio gear, and the PV215D does not disappoint. Built with a rugged, plywood enclosure, the speaker is designed to withstand the rigors of touring and frequent transport. Its protective grille ensures that the drivers are shielded from damage without compromising sound quality. Additionally, the speaker’s flight-ready design offers options for mounting and rigging, making it a versatile tool for any audio setup.

Peavey has also equipped the PV215D with built-in power amplification, offering a powerful output to drive the speaker effectively without the need for an external amp. This self-powered feature simplifies setup and reduces the amount of equipment needed for performances.

In terms of connectivity, the PV215D provides multiple input options, allowing for easy integration into a variety of audio systems. It also includes a built-in equalizer, enabling users to tailor the sound to their specific needs and preferences.

Overall, the Peavey PV215D is a comprehensive solution for high-quality sound reinforcement. Offering impressive power, durability, and sonic versatility, it stands out in the competitive market of professional audio equipment. Whether for live music, DJ events, or public speaking engagements, the PV215D is designed to meet the demands of both performers and audiences, ensuring an unforgettable auditory experience.