Peavey PV215D manual Important Safety Instructions, ⁄4 or less

Page 4

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using electrical products, basic cautions should always be followed, including the following:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.

11. Only use attachments/accessories provided by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Never break off the ground pin. Write for our free booklet “Shock Hazard and Grounding.” Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.

16.If this product is to be mounted in an equipment rack, rear support should be provided.

17.Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚

proceed as follows: a) The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ colored green or colored green and yellow. b) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. c) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.

18.This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus.

19.The on/off switch in this unit does not break both sides of the primary mains. Hazardous energy can be present inside the chassis when the on/off switch is in the off position. The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

20.Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures:

Duration Per Day In Hours

Sound Level dBA, Slow Response

8

90

6

92

4

95

3

97

2

100

1 1⁄2

102

1

105

1⁄2

110

1⁄4 or less

115

According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.

ENGLISH

SAVE THESE INSTRUCTIONS!

Image 4
Contents PV215 D Deutsch 人体への電気ショックの危険が考えられる製品筐体内の非絶縁「危険電圧」の存在をユーザーに警告す るものです。 Duration Per Day In Hours Sound Level dBA, Slow Response Important Safety Instructions⁄4 or less Instrucciones Importantes Para SU Seguridad Guarde Estas Instrucciones⁄ 4 o menos Instructions Importantes DE Securite Gardez CES InstructionsNiveau sonore moyen dBA Bewahren SIE Diese Sicherheitshinweise AUF Wichtige SicherheitshinweiseSäilytä Nämä Ohjeet Tärkeät TurvallisuusohjeetSpara Dessa Instruktioner Viktiga SäkerhetsinstruktionerImportanti Norme DI Sicurezza Conservate Queste Istruzioni⁄4 o minore 115 Guarde Essas Instruções Instruções Importantes DE Segurança本書は保管してください 请妥善保管本说明书! 일별 지속 시간 소음 수준 dBA, 저속 반응 ¼ 이하Features ApplicationsIEC Power Cord Connection Voltage Selector SwitchChanging the Voltage Range of the PV215D 2a Fuse ON-OFF SwitchInput Jack Contour Switch POWER/CLIP LEDLevel Link OUTLevel Control Adjustment Use of the PV215D with a powered SubwooferTroubleshooting No Output at AllCare and Maintenance CleaningDistorted or Fuzzy Sound Sunlight/HeatArchitectural and Engineering Specifications Peavey PV215D SpecificationsPeavey Electronics Corporation Limited Warranty Customer warranty registration From Corporation Electronics Peavey

PV215D specifications

The Peavey PV215D is a powerful and versatile dual 15-inch loudspeaker system designed to deliver exceptional sound quality for live performances, events, and installations. Renowned for its robust construction and advanced technologies, the PV215D appeals to musicians, sound engineers, and venue owners seeking reliability and performance in one package.

One of the standout features of the PV215D is its dual 15-inch heavy-duty woofer configuration, which is engineered to produce deep, resonant bass and clear mids. This design allows the speaker to handle a wide frequency range, ensuring that every note is delivered with precision and clarity. The inclusion of a high-frequency compression driver ensures the production of crisp highs, further enhancing the speaker's versatility in various sound applications.

At the heart of the PV215D is Peavey's proprietary technology that improves sound dispersion. The speaker features a unique horn design that optimally distributes sound throughout the venue, significantly minimizing dead spots and providing a more uniform listening experience. This technology makes the PV215D ideal for larger spaces, whether in outdoor festivals or indoor concert halls.

Durability is a key consideration for any professional audio gear, and the PV215D does not disappoint. Built with a rugged, plywood enclosure, the speaker is designed to withstand the rigors of touring and frequent transport. Its protective grille ensures that the drivers are shielded from damage without compromising sound quality. Additionally, the speaker’s flight-ready design offers options for mounting and rigging, making it a versatile tool for any audio setup.

Peavey has also equipped the PV215D with built-in power amplification, offering a powerful output to drive the speaker effectively without the need for an external amp. This self-powered feature simplifies setup and reduces the amount of equipment needed for performances.

In terms of connectivity, the PV215D provides multiple input options, allowing for easy integration into a variety of audio systems. It also includes a built-in equalizer, enabling users to tailor the sound to their specific needs and preferences.

Overall, the Peavey PV215D is a comprehensive solution for high-quality sound reinforcement. Offering impressive power, durability, and sonic versatility, it stands out in the competitive market of professional audio equipment. Whether for live music, DJ events, or public speaking engagements, the PV215D is designed to meet the demands of both performers and audiences, ensuring an unforgettable auditory experience.