Architectural and Engineering Specifications

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The powered loudspeaker system shall have a frequency response from 58 Hz to 17 kHz. The peak SPL with inaudible distortion shall reach 127 dB with music as a source, when measured at a distance of 1M and driven to full output capacity. The system shall utilize dual heavy-duty 15” Peavey® Pro 15 model woofers, and a Peavey® RX™14 titanium diaphragm compression driver tweeter on a constant directivity horn. The nominal radiation pattern shall be 60 degrees in the horizontal plane and 40 degrees in the vertical plane.

The powered loudspeaker system shall have a medium impedance input connector consisting of one combo female XLR and 1/4” RTS phone jack on the rear panel. Output connections on the rear panel shall consist of a 1/4” phone jack providing link-out, which provides a pre-level control signal for the use of linking multiple PV®215D’s in a line. A level control will be located next to the input jack. Next to the level control, a Contour Switch pushbutton will provide some bass and treble lift when engaged for improved listening at low levels.

The system power amplifiers shall have an unfiltered frequency response of 20 Hz to 20 kHz which deviates no more than +0, -3 dB up to rated power, a damping factor greater than 200 @ 1 kHz into 4 ohms, hum and noise better than 90 dB below rated power, and typical THD and IMD of less than 0.5%. The amplifier shall be capable of 400W continuous output into a 4 ohm nominal load and shall incorporate DDT™ compression.

The enclosure shall be constructed of MDF-type wood panels and be covered in black carpet. A pair of metal handles shall be provided on the sides. A black-coated perforated metal grille shall be provided for speaker component protection. The cabinet shall incorporate 4 rubber feet for floor standing use.

The outside dimensions shall be 48.50” tall by 18.88” wide by 14.75” deep, and the weight shall be 79 lbs. Power requirements shall be a dual voltage range of: 100 to 120VAC, and 220 to 240VAC, 50 - 60 Hz, with a nominal power consumption of 370 watts. The voltage ranges shall be switch selectable on the rear panel. The loudspeaker system shall be called a Peavey model PV®215D.

PEAVEY® PV®215D - SPECIFICATIONS

Enclosure: Peavey PV®215D

Frequency Range 1 meter on-axis, swept-sine in 1/2 Space environment: -10 dB: 40 Hz to 21 kHz

Frequency Response 1 meter on-axis, swept-sine in 1/2 Space environment: 58 Hz to 17 kHz (±3 dB )

Sensitivity: (1w/1m) 98 dB

Maximum Peak SPL: 127 dB

Transducer Compliment: Dual heavy-duty Pro 15 15” woofer with 2 3/8” voice coil & 50 oz. magnet

RX™14 1.4” titanium diaphragm dynamic compression driver, on a Constant Directivity 60 X 40 horn.

Nominal Coverage Pattern: 60 degrees horizontal by 40 degrees vertical

Electro-acoustic Crossover Frequency: 2.6 kHz

Input Connections: One combo female XLR/ 1/4” phone jack providing balanced or unbalanced operation.

Enclosure Materials & Finish: Trapezoidal, black carpet covered 12mm MDF, black powder-coated full length perforated steel grille.

Mounting or Suspension: Four rubber feet for floor use.

NOTE: This unit is not designed for overhead suspension!

Dimensions (H x W x D):

Front: 48.50 in. x 18.88 in. x 14.75 in. 1232 mm x 480 mm x 375 mm Rear: 48.50 in. x 11.25 in. x 14.75in. 1232 mm x 286 mm x 375 mm

Weight:

79 Lbs. (35.9 kg)

ELECTRONICS AND AMPLIFIER SPECIFICATIONS:

Power Amp Rating, Total Power Output: 800 watts peak available

power, Continuous Power: 400 watts into 4 ohms @ less than 1% distortion

Electronic Input Impedance (Nominal): 2.7 k ohms balanced (XLR or 1/4”), 1.35 k ohms unbalanced 1/4”.

Infrasonic filter protection: 24 dB/octave roll-off

Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz

Hum and Noise: Greater than 90 dB below rated power

DDT Dynamic Range: Greater than 14 dB

THD and IM: Typically less than 0.5 %

Damping Factor: Greater than 200 @ 1000 Hz, 4 Ohms

Power requirements of Peavey PV®2015D System: Nominal 370

Watts, Voltage and Frequency Ranges: 100-120 VAC, and 220 – 240VAC, at 50- 60 Hz

Fuse Type:

For 100-120 VAC USE: International fuse classification T6.3AL . In the USA, types GDC, GMC, 215, 218, and 477 cartridge-style 5 x 20 mm size fuses with a 6.3 amp 250V rating can be used.

For 220-240 VAC USE: International fuse classification T3.15AL . This is a cartridge style 5 x 20 mm size time-delay fuse with a 3.15 amp 250V rating.

PV215D specifications

The Peavey PV215D is a powerful and versatile dual 15-inch loudspeaker system designed to deliver exceptional sound quality for live performances, events, and installations. Renowned for its robust construction and advanced technologies, the PV215D appeals to musicians, sound engineers, and venue owners seeking reliability and performance in one package.

One of the standout features of the PV215D is its dual 15-inch heavy-duty woofer configuration, which is engineered to produce deep, resonant bass and clear mids. This design allows the speaker to handle a wide frequency range, ensuring that every note is delivered with precision and clarity. The inclusion of a high-frequency compression driver ensures the production of crisp highs, further enhancing the speaker's versatility in various sound applications.

At the heart of the PV215D is Peavey's proprietary technology that improves sound dispersion. The speaker features a unique horn design that optimally distributes sound throughout the venue, significantly minimizing dead spots and providing a more uniform listening experience. This technology makes the PV215D ideal for larger spaces, whether in outdoor festivals or indoor concert halls.

Durability is a key consideration for any professional audio gear, and the PV215D does not disappoint. Built with a rugged, plywood enclosure, the speaker is designed to withstand the rigors of touring and frequent transport. Its protective grille ensures that the drivers are shielded from damage without compromising sound quality. Additionally, the speaker’s flight-ready design offers options for mounting and rigging, making it a versatile tool for any audio setup.

Peavey has also equipped the PV215D with built-in power amplification, offering a powerful output to drive the speaker effectively without the need for an external amp. This self-powered feature simplifies setup and reduces the amount of equipment needed for performances.

In terms of connectivity, the PV215D provides multiple input options, allowing for easy integration into a variety of audio systems. It also includes a built-in equalizer, enabling users to tailor the sound to their specific needs and preferences.

Overall, the Peavey PV215D is a comprehensive solution for high-quality sound reinforcement. Offering impressive power, durability, and sonic versatility, it stands out in the competitive market of professional audio equipment. Whether for live music, DJ events, or public speaking engagements, the PV215D is designed to meet the demands of both performers and audiences, ensuring an unforgettable auditory experience.