Kenmore Understanding the Oven Lockout and Lock Features

Setting Oven		Controls (con't)
Setting	Oven Lockout Feature
The _	pad controls	the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the Oven from being turned ON. it does not disable the clock, Kitchen Timer or the interior oven lights.

iNSTRUCTiONS PRESS DISPLAY

To activate the Oven Lockout feature

t. Press and hold _ for 3 seconds (Figure t ).

v

2.After 3 seconds "LOC" will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "LOC".

@

for 3 seconds

Figure 1

To reactivate normal oven operation:

t.Press and hold _ for 3 seconds. A beep will sound. The "DOOR LOCKED" will flash in the display until the oven door

has completely unlocked and "LOC" has cleared (figure 2).

2.The appliance is again fully operational.

@

for 3 seconds

Figure 2

To Set	the Cooktop Lockout Feature	_COOKTOP
The _	pad is used to activate the Cooktop	Lockout feature which will lock all surface	elements from being accidentally
turned ON. This feature will only lock the cooktop.
	INSTRUCTIONS	PRESS	DISPLAY

To turn the Cooktop Lockout Feature ON:

1.BE SURE ALL surface element controls are set to the OFF position.

2.	Press and hold _	until "CLO" appears. Continue holding until a
	second beep sounds (after 3 seconds). Ifa triple beep sounds instead,
	check all surface elements and turn them to the OFF position and repeat
	this step. I_1will appear in the display indicating the cooktop controls and
	functions are locked out until the cooktop is unlocked (See Figure 3).
3.	To remove "CLO"	from the display, press _	or wait 30 seconds
	(See Figure 4).

To turn the Cooktop Lockout Feature OFF:

1.BE SURE ALL surface element controls are set to the OFF position.

Figure 3

Figure 4

v

Figure 5

2.	Press and hold _	until "CLO" appears. Continue holding until a		(.,[_
	second beep sounds (after 3 seconds). If a triple beep sounds
	instead, check all surface elements and turn them to the OFF
	position and repeat this step. I_1 will disappear from the display			Figure 6
	indicating the cooktop may be used normally (See Figure 5).
3.	To remove "CLO"	from the display, press _	or wait 30 seconds
	(See Figure 6).

Note: Starting a Self-Clean cycle will automatically turn ON the Cooktop Lockout feature. The cooktop will remain locked until the Self-Clean cycle has completed and the oven door has unlocked. If a power failure occurs after the Cooktop Lockout has been activated, you must turn OFF the Cooktop Lockout feature before being able to use the cooktop features again.

16