ASSEMBLY
HOW TO INSTALL THE SEAT
1.Carefully remove the plastic bag from the seat.
Use the fasteners shown below to install the seat. The fasteners are shown at full size.
(A)(B)
100105417x47
NOTE: Fasteners may be attached to seat for shipping purposes, if so remove fasteners before proceeding.
2.Align the holes in the seat hinge to the holes in the seat (Figure 1). Fasten the seat to the seat hinge with the fasteners as shown.
3.Check the operating position of the seat. If the seat needs to be adjusted, loosen the two wing bolts. Slide the seat forward or backward along the seat adjusting holes as shown. Tighten the wing bolts (A).
Seat |
|
Seat Hinge | |
| Seat |
Adjusting Hole | |
B | A |
| |
| Figure 1 |
HOW TO ASSEMBLE THE STEERING WHEEL
Attach the steering wheel as follows:
(A)
25x3
(C)
17x146
1.Make sure the front wheels point forward.
2.Slide the cover over the steering post (Figure 2).
3.Slide the steering wheel onto the steering post.
4.Use the fasteners shown above to secure the steering wheel. The fasteners are shown at full size. Tighten the screw. DO NOT over tighten.
5.Remove adhesive backing from hub cover (found in parts bag) and place hub cover over hub.
Hub Cover
A
C
Steering Wheel
Cover 
Steering Post | Figure 2 |
|
11 |