Murray 461000x8A HOW to Replace the Primary Mower Drive Belt, Assemble the left pulley cover

Page 32

MAINTENANCE

HOW TO REPLACE THE PRIMARY

MOWER DRIVE BELT

1.Remove the mower housing. See the instructions on “How To Remove The Mower Housing”.

2.Remove the three screws from the left pulley cover. Remove the pulley cover.

3.To remove the primary mower drive belt from the left man- drel pulley, slide the primary mower drive belt between the left mandrel pulley and the belt guides.

4.Pull the belt retainer away from the idler pulley. Remove the primary mower drive belt from the idler pulley.

5.Move the brake pad assembly away from the stack pulley. Remove the primary mower drive belt from the stack pulley.

NOTE: Replace the primary mower drive belt with an original equipment belt. See an authorized service center in your area.

6.Install a new primary mower drive belt. Pull the brake pad as- sembly away from the stack pulley. Put the belt around the stack pulley. Make sure the primary mower drive belt is in- side of the belt guide.

7.Pull the belt retainer away from the idler pulley. Put the flat side of the primary mower drive belt around the idler pulley.

8.Make sure the “V” side of the primary mower drive belt is against the mandrel pulleys as shown.

9.Make sure the primary mower drive belt is inside all the belt guides.

10.Assemble the left pulley cover.

11.Install the mower housing. See the instructions on “How To In- stall The Mower Housing”.

12.Before you mow, check the blade rotation control. See the in- structions on “How To Adjust The Blade Rotation Control”.

HOW TO REPLACE THE SECONDARY MOWER DRIVE BELT

1.Remove the mower housing. See the instructions on “How To Remove The Mower Housing”.

2.Remove the primary mower drive belt from the stack pulley.

3.Remove the two screws from the right pulley cover. Remove the right pulley cover.

4.Pull the idler pulley away from the secondary mower drive belt. Remove the belt from the idler pulley.

5.Remove the secondary mower drive belt from the right man- drel pulley.

6.Remove the secondary mower drive belt from the stack pulley.

NOTE: Replace the secondary mower drive belt with an original equipment belt. See an authorized service center in your area.

7.Install a new secondary mower drive belt. Put the belt around the bottom of the stack pulley. Make sure the secondary mower drive belt is inside the belt guide next to the stack pulley.

8.Put the secondary mower drive belt around the right drive pulley.

9.Pull the idler pulley toward the front. Install the flat side of the secondary mower drive belt against the idler pulley.

10.Make sure the “V” side of the secondary mower drive belt is around the right mandrel pulley.

11.Assemble the right pulley cover.

12.Put the primary mower drive belt around the stack pulley.

13.Install the mower housing. See the instructions on “How To In- stall The Mower Housing”.

14.Before you mow, check the blade rotation control. See the in- structions on “How To Adjust The Blade Rotation Control”.

 

 

 

Left

 

 

Screw

Pulley Cover

Screw

 

 

 

 

 

Idler Pulley

Belt

 

 

 

 

Right Pulley Cover

 

Retainer

 

 

Stack Pulley

Left

 

 

 

Mandrel Pulley

 

Brake Pad

Belt Guide

 

 

Assembly

 

 

 

Belt Guide

 

 

 

 

Secondary

 

 

 

Mower Drive Belt

 

 

Right

 

 

 

Mandrel

 

 

 

Pulley

 

 

 

 

 

 

Brake Pad Assembly

 

 

 

Primary Mower Drive Belt

 

Idler Pulley

 

Figure 37

 

 

 

F–030718L

 

32

 

Image 32
Contents Model Table of Contents Safe Operation Practices for Ride-on Mowers OWNER’S InformationEnvironmental Awareness II. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Steps to Follow Before MowingSafety Warning Pictorials International PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Install the Seat HOW to Assemble the Steering Wheel100105417x47 25x3 17x146Maintenance Free Battery HOW to Charge Maintenance Free BatteryHOW to Install the Battery Cables Remove the battery and battery trayHOW to Prepare the Engine Check the Level of the Mower HousingIMPORTANT! Before YOU Start Mowing Check the TiresLift Lever OperationLocation of Controls HOW to USE the Throttle Control HOW to USE the Shift LeverAttachments See the Instruction Book for the AttachmentHOW to SET the Parking Brake HOW to Change the Cutting HeightHOW to Stop the Unit HOW to Transport the UnitHOW to Operate with the Mower Housing HOW to Operate the Unit on HillsCarburetor HOW to Start the EngineBefore Starting the Engine Operating Tips Mowing and Bagging TipsHOW to Change the Mulcher Plate How To Remove The Mulcher PlateMaintenance Frequency Maintenance Required CommentsHOW to Check the Muffler General RecommendationsHOW to Remove and Install the Blade HOW to Sharpen the BladeInspect Blade Mount the blade and blade adapter on the mandrelHOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Motion Drive Belt HOW to Check and Adjust the Drive BrakeHOW to Adjust the Shift Lever Disconnect the red cable from the positive + terminalWhere to Lubricate HOW to Check the Fuel FilterHOW to Remove the Mower Housing HOW to Install the Mower HousingRemove the mower drive belt from the stack pulley Attach the extension spring to the blade control rod. See5,6 HOW to Adjust the Gauge WheelsLift Lever Hole No Position No HOW to Level the Mower Housing HOW to Replace Motion Drive Belt Remove the motion drive belt from the drive pulley FigureInstallation HOW to Replace the Primary Mower Drive Belt HOW to Replace the Secondary Mower Drive BeltAssemble the left pulley cover Remove the primary mower drive belt from the stack pulleyHOW to Install the Wheels Fasten the rear wheel with washer and e-ringHOW to Replace the Fuse HOW to Replace the Light BulbHOW to Clean the Mower Housing BatteryTrouble Shooting Chart 030718L MURRAY, INC. Lawn Mower Central Parts Distributors 030718LSeat Deck Key Description Repair Parts Hood and DashRepair Parts Motion Drive Repair Parts Model 461000x8A Sector Gear Key Part DescriptionRepair Parts Front Axle Repair Parts Engine Mount Assembly Engine Mount Assembly Repair Parts Electrical System Electrical System Mower Housing Suspension Key Description Blade Drive This part is Included with Key Mower Housing Model 461000x8AREPAIR Parts Front Frame Assembly Repair Parts Rear Frame Assembly 030718L 030718L Index Model No Bushel Capacity