Murray 461000x8A manual OWNER’S Information, Environmental Awareness

Page 3

OWNER’S INFORMATION

This instruction book is for several different models. The instructions are written for a person with some mechanical ability. Like most ser- vice books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability. Read and follow these instructions before you use the unit.

Know your product: If you understand the unit and how the unit oper- ates, you will get the best performance. As you read this manual, com- pare the illustrations to the unit. Learn the location and the function of the controls. To help prevent an accident, follow the operating instruc- tions and the safety rules. Keep this manual for future reference.

IMPORTANT: Many units are not assembled and are sold in car- tons. It is the responsibility of the owner to make sure the assembly instructions in this manual are exactly followed. Other units are pur- chased in an assembled condition. On assembled units, it is the re- sponsibility of the owner to make sure the unit is correctly assembled. The owner must carefully check the unit according to the instructions in this manual before it is first used.

Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other repro- ductive harm.

Battery posts, terminals and related accesso- ries contain lead and lead compounds, chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.

RESPONSIBILITY OF THE OWNER

The responsibility of the owner is to follow the instructions below.

1.Carefully read and follow the rules for safe operation.

2.Follow all the assembly instructions.

3.Inspect the unit.

4.Make sure that the operator of the unit knows how to correctly use all standard and accessory equipment.

5.Operate the unit only with guards, shields, and other safety items in place and working correctly.

6.Correctly adjust the unit.

7.Service the unit only with authorized or approved replacement parts.

8.Complete all maintenance on the unit.

Environmental Awareness

DDo not fill the engine’s fuel tank completely full.

DDrain fuel for off–season storage.

DUse only unleaded gasoline.

DService the air cleaner regularly.

DChange oil regularly. Use 10W–30 oil in summer.

DTune–up the engine regularly.

DKeep equipment in efficient operating condition.

DDispose of used engine oil properly.

SAFETY RULES

Safe Operation Practices for Ride–on Mowers

WARNING: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

I. General operation

1.Read, understand and follow all instructions in the Instruction Book, on the machine, the engine and with any attachments before starting.

2.Only allow responsible adults, who are familiar with the instructions, to operate the machine.

3.Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

4.Be sure the area is clear of other people before mowing. Stop the machine if anyone enters the area.

5.Never carry passengers.

6.Turn off power to the blades or any attachments before backing up. Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

7.Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass bagger or the mower guard in place.

8.Slow down before turning.

9.Never leave a machine unattended with the engine running. Always turn off the blade(s), set the parking brake, stop the engine and remove the key before dismounting.

10.Turn off power to attachment(s) when transporting or not in use. Turn off the blade(s) when not mowing.

11.Stop the engine before removing the grass bagger or unclogging the chute.

12.Mow only in daylight or good artificial light.

13.Do not operate the machine while under the influence of alcohol or drugs or when very tired.

14.Watch for traffic when operating near or crossing roadways.

15.Use extra caution when loading or unloading the machine into a trailer or truck.

16.Disengage all attachment clutches and shift into Neutral before attempting to start the engine.

17.Always wear goggles, safety glasses, or an eye shield when you operate the unit to protect your eyes from foreign objects that can be thrown from the unit. Always wear eye protection when you make an adjustment or repair to the machine.

18.Use care when pulling loads or using heavy equipment. a. Use only approved drawbar hitch points.

F–030718L

3

Image 3
Contents Model Table of Contents OWNER’S Information Environmental AwarenessSafe Operation Practices for Ride-on Mowers II. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowControl And Operating Pictorials Safety Warning PictorialsInternational Pictorials International PictorialsAssembly Assembly25x3 17x146 HOW to Install the SeatHOW to Assemble the Steering Wheel 100105417x47Remove the battery and battery tray Maintenance Free BatteryHOW to Charge Maintenance Free Battery HOW to Install the Battery CablesCheck the Tires HOW to Prepare the EngineCheck the Level of the Mower Housing IMPORTANT! Before YOU Start MowingOperation Location of ControlsLift Lever See the Instruction Book for the Attachment HOW to USE the Throttle ControlHOW to USE the Shift Lever AttachmentsHOW to Transport the Unit HOW to SET the Parking BrakeHOW to Change the Cutting Height HOW to Stop the UnitHOW to Operate the Unit on Hills HOW to Operate with the Mower HousingHOW to Start the Engine Before Starting the EngineCarburetor Mowing and Bagging Tips Operating TipsHow To Remove The Mulcher Plate HOW to Change the Mulcher PlateGeneral Recommendations MaintenanceFrequency Maintenance Required Comments HOW to Check the MufflerMount the blade and blade adapter on the mandrel HOW to Remove and Install the BladeHOW to Sharpen the Blade Inspect BladeHOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Drive Brake HOW to Check and Adjust the Motion Drive BeltDisconnect the red cable from the positive + terminal HOW to Adjust the Shift LeverHOW to Check the Fuel Filter Where to LubricateAttach the extension spring to the blade control rod. See HOW to Remove the Mower HousingHOW to Install the Mower Housing Remove the mower drive belt from the stack pulleyHOW to Adjust the Gauge Wheels Lift Lever Hole No Position No5,6 HOW to Level the Mower Housing Remove the motion drive belt from the drive pulley Figure HOW to Replace Motion Drive BeltInstallation Remove the primary mower drive belt from the stack pulley HOW to Replace the Primary Mower Drive BeltHOW to Replace the Secondary Mower Drive Belt Assemble the left pulley coverFasten the rear wheel with washer and e-ring HOW to Install the WheelsBattery HOW to Replace the FuseHOW to Replace the Light Bulb HOW to Clean the Mower HousingTrouble Shooting Chart 030718L 030718L MURRAY, INC. Lawn Mower Central Parts DistributorsSeat Deck Key Description Hood and Dash Repair PartsRepair Parts Motion Drive Repair Parts Model 461000x8A Key Part Description Sector GearRepair Parts Front Axle Repair Parts Engine Mount Assembly Engine Mount Assembly Repair Parts Electrical System Electrical System Mower Housing Suspension Key Description Blade Drive This part is Included with Key Mower Housing Model 461000x8AREPAIR Parts Front Frame Assembly Repair Parts Rear Frame Assembly 030718L 030718L Index Bushel Capacity Model No