OPERATION
HOW TO CHANGE THE MULCHER PLATE
WARNING: To prevent the engine from starting, dis- connect the wire from the spark plug. Make sure the blade rotation control is in the DISENGAGE position.
The mulcher plate lets you mulch the grass for a clean, fine cut. To discharge the grass out the side or into a grass bagger, remove the mulcher plate as follows.
How To Remove The Mulcher Plate
1.Raise the deflector. Remove the two wingnuts B and two car- riage bolts A (Figure 9).
2.Lift the mulcher plate away from the mower housing (Figure 10).
3.Attach wingnuts B and carriage bolts A to the mulcher plate for future use.
IMPORTANT: There are several different types of grass. Some types of grass are more difficult to cut. If you remove the mulcher plate and the grass does not discharge correctly, replace the blade with a standard blade. The part number of the standard blade is 92117E701.
How To Install The Mulcher Plate
1.Raise the deflector. Mount the bottom flange of the mulcher plate to the mower housing (Figure 10).
2.Slide the top of the mulcher plate under the deflector bracket (Figure 9).
3.Fasten the mulcher plate with two wingnuts B and two car- riage bolts A.
| Deflector | Deflector Bracket |
|
| |
B |
|
|
| Mulcher Plate | B |
A |
| |
A |
| |
| Figure 9 | |
|
| |
|
| Deflector |
Bottom Flange
Figure 10
20 |