Murray 425604x18A manual Steps to Follow, Before Mowing

Page 8

STEPS TO FOLLOW

BEFORE MOWING

FBe sure to dress correctly. Wear hard shoes, not sandals or tennis shoes.

FExamine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade.

FFill the fuel tank outside. Clean off spilled fuel.

FRead and follow the Owner’s Manual, the instructions with the engine, and the instructions with any attachments. Owner’s Manual instructions are for your safety and the safety of others.

FExhaust fumes are dangerous. Start the engine outside.

FMake sure all safety devices are in place and working correctly.

FOperation of the mower is only for a person that has experience.

FWet grass can be dangerous. Let the grass dry.

FInstruct children and others to keep away from the work area.

FNever cut the grass without good light.

FPick up loose objects. Remove them from the mowing area.

WHILE MOWING

FWatch for fixed objects and avoid them. They can damage the mower or cause injury.

FA hot engine, muffler, and transmission will cause a burn. Do not touch.

FInclines and slopes must be carefully mowed. See the “Guide” in the back of this book to check a slope.

FLack of daylight or good artificial light is cause to stop mowing.

FExamine the mower, the blade, and other parts for damage after hitting a foreign object or if the unit vibrates excessively.

FDo not make adjustments or repairs without stopping the engine. Disconnect the spark plug wire.

FOn or near roads, watch out for traffic. Direct discharge away from roads.

FWhen mowing, avoid areas where traction is unsure. Look back before changing direction of travel.

FIn heavy grass, raise the cutting height. Cut slower. Stop the engine to remove clogged grass from the mower.

FNever remove any safety related parts.

FDo not pour gasoline into a engine that is hot or running.

AFTER MOWING

FAlways let the mower cool before storing in an enclosed area.

FForeign material on the mower is dangerous. Clean off grass, leaves, grease and oil before storing.

FTighten all loose nuts, bolts and screws before you use the unit.

FEmpty and clean any grass catcher or other accessory.

FRemove the key or disconnect the spark plug wire to prevent unauthorized use.

FMake sure the mower is not kept near a source of ignition. Gas fumes can cause an explosion.

FOnly original parts or factory approved substitutes can be used to service the mower.

FWhen storing the mower for an extended period, remove the fuel from the fuel tank.

FInstruct children to leave the mower alone. It is not a toy.

FNever keep gasoline near a source of ignition. Always use an approved container. Keep gasoline away from children.

FLubricate according to the Instruction Book. See “Lubrication”.

IMPORTANT––Read the Instruction Book. Keep this book for future use and reference.

WARNING: Look for this symbol to point out important

safety precautions. It means: “Attention! Become Alert! Your Safety Is Involved.”

F–030753L

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model Table of Contents Safe Operation Practices for Ride-on Mowers OWNER’S InformationEnvironmental Awareness II. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Steps to Follow Before MowingSafety Warning Pictorials International PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Assemble the Gauge Wheels HOW to Install the SeatHOW to Assemble the Steering Wheel Maintenance Free Battery HOW to Charge Maintenance Free BatteryHOW to Install the Battery Cables Remove the battery and battery trayHOW to Prepare the Engine Check the Level of the Mower HousingIMPORTANT! Before YOU Start Mowing Check the TiresOperation Location of ControlsHOW to USE the Throttle Control AttachmentsHOW to USE the Speed Control Pedal HOW to Disconnect the TransmissionTo 1/2 To 2/3HOW to SET the Parking Brake HOW to Change the Cutting HeightHOW to Stop the Unit HOW to Transport the UnitHOW to Operate with the Mower Housing HOW to Operate the Unit on HillsCarburetor HOW to Start the EngineBefore Starting the Engine Operating Tips Mowing and Bagging TipsMaintenance Frequency Maintenance Required CommentsHOW to Check the Muffler General RecommendationsHOW to Remove and Install the Blade HOW to Sharpen the BladeInspect Blade Mount the blade and blade adapter on the mandrelHOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Motion Drive Belt Remove the 1/4 inch 6 mm pin or bolt FigureHOW to Check and Adjust the Drive Brake Disconnect the red cable from the positive + terminalWhere to Lubricate HOW to Check the Fuel FilterRemove the mower drive belt from the stack pulley HOW to Remove the Mower HousingHOW to Install the Mower Housing 5,6 HOW to Adjust the Gauge WheelsLift Lever Hole No Position No HOW to Level the Mower Housing Remove the mid-idler pulley HOW to Replace the Motion Drive BeltInstall the mid-idler pulley HOW to Replace the Mower Drive Belt HOW to Install the Wheels Fasten the rear wheel with washer and e-ringHOW to Replace the Fuse HOW to Replace the Light BulbHOW to Clean the Mower Housing BatteryTrouble Shooting Chart 030753L USARepair Parts Chassis & HoodKey Description Drive Assembly Drive Assembly Steering Steering Repair Parts Mower Housing Suspension Mower Housing Suspension Mower Housing 7601032 Repair Parts Engine Mount Assembly Engine Mount Assembly Repair Parts Electrical System Electrical System Key Part Description030753L Index Model No Model No Bushel Capacity

425604x18A specifications

The Murray 425604x18A is a powerful and versatile lawn mower engineered to meet the needs of both residential and commercial users. With its robust design and advanced features, this mower stands out in the market, ensuring efficient lawn maintenance for a variety of grass types and terrains.

One of the key features of the Murray 425604x18A is its reliable engine. Powered by a high-performance motor, it delivers consistent power for cutting through tough grass and uneven landscapes. The engine boasts a low-emission system, making it an environmentally friendly option while still maintaining optimal performance. This balance of power and eco-friendliness is particularly appealing to those who are conscious of their carbon footprint.

In terms of cutting capabilities, the Murray 425604x18A offers a cutting width of 18 inches, allowing for easy maneuverability in tighter spaces. It is equipped with multiple cutting height adjustments, enabling users to achieve their desired lawn finish, whether they prefer a closely cropped look or a longer grass finish. The precision cutting technology ensures that each pass leaves a uniform and clean cut, promoting a healthier lawn.

Comfort and ease of use are also highlights of this mower. The ergonomic design includes an adjustable handle, ensuring that operators of all heights can find a comfortable grip. The lightweight construction enhances maneuverability, reducing fatigue during prolonged use. The mower’s large wheels provide excellent traction, making it suitable for various terrains, from hilly landscapes to flat gardens.

Another notable characteristic is the mower's ease of maintenance. The durable blade system is designed for simple sharpening and replacement, allowing users to keep their mower in top condition with minimal hassle. Additionally, the easy-to-access engine compartment simplifies routine checks and servicing.

The Murray 425604x18A is also designed with safety in mind. Features such as a safety switch ensure that the mower cannot be started accidentally, protecting users and bystanders alike.

Overall, the Murray 425604x18A combines power, efficiency, and ease of use, making it an outstanding choice for anyone looking to maintain their lawn effectively. With its thoughtful design and reliable performance, this mower stands ready to tackle the challenges of lawn care with confidence.
Top Page Image Contents