Murray 387002x92D manual HOW to Replace the Motion Drive Belt, Removal

Page 29

MAINTENANCE

HOW TO REPLACE THE MOTION DRIVE BELT

REMOVAL

1.Remove the mower housing. See the instructions on “How To Remove The Mower Housing”.

2.Completely push the pedal forward and engage the parking brake.

3.Remove the idler pulley (Figure 25).

4.Loosen the belt guides that are around the drive pulley.

5.Remove the motion drive belt from the drive pulley.

6.To remove the motion drive belt from the stack pulley, pull the front end of the belt under the stack pulley and then back between the stack pulley and the belt guide plate (Figure 26).

7.Put the end of the motion drive belt from the drive pulley through the hole for the shift lever (Figure 27). Move the shift lever and push the belt under the shift lever.

8.Remove the motion drive belt. A correct replacement part or assistance is available from an Authorized Service Center in your area.

INSTALLATION

1.Slide the motion drive belt between the stack pulley and the belt guide plate (Figure 26). Install the motion drive belt on the top pulley of the stack pulley. Make sure the “V” side of the belt is against the pulley.

2.Push the motion drive belt through the hole in the frame for the shift lever (Figure 27). Lift the end of the belt over the shift lever and back down through the hole in the frame.

3.Install the end of the motion drive belt around the drive pulley (Figure 25).

4.Tighten the belt guides that are around the drive pulley.

5.Put the belt around the idler pulley. Assemble the idler pulley. Fasten the idler pulley with the hex nut. Make sure the flat side of the belt is against the idler pulley as shown. Also, make sure the belt is not twisted.

6.Make sure the motion drive belt is inside all the belt guides (Figure 25 and Figure 26).

7.Before you use the unit, check the adjustment of the clutch. See the instructions “How To Check And Adjust The Clutch”.

8.Install the mower housing. See the instructions “How To Install The Mower Housing”.

Drive Pulley

Motion

Drive Belt

Idler Pulley

Loosen The

Belt Guides

Figure 25

FRONT

Belt Guides

Belt Guide

Plate

Motion

Drive Belt

Stack Pulley

Figure 26

Shift Lever

Motion Drive Belt

Figure 27

F-050717L

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Model Table of Contents Environmental Awareness OWNER’S InformationII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowInternational Pictorials Safety Warning PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Charge the Maintenance Free Battery Maintenance Free BatteryHOW to Assemble the Steering Wheel HOW to Install the SeatCheck the Level of the Mower Housing HOW to Prepare the EngineIMPORTANT! Before YOU Start Mowing Check the TiresLift Lever OperationLocation of Controls HOW to Operate the Ignition KEY Switch Electrical Safety SystemHOW to USE the Throttle Control AttachmentsSee the Instruction Book for the Attachment HOW to USE Blade Rotation ControlHOW to USE the Shift Lever HOW to Change the Cutting Height HOW to SET the Parking BrakeHOW to Stop the Unit HOW to Transport the UnitHOW to Operate the Unit on Hills HOW to Operate with the Mower HousingCarburetor HOW to Start the EngineBefore Starting the Engine Mowing and Bagging Tips Operating TipsMaintenance Chart MaintenanceHOW to Check the Muffler General RecommendationsInspect Blade HOW to Remove and Install the BladeHOW to Sharpen the Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Clutch HOW to Check and Adjust the Drive BrakeHOW to Clean the Battery HOW to Check the Fuel Filter Where to LubricateHOW to Install the Mower Housing HOW to Remove the Mower HousingAttach the spark plug wire to the spark plug HOW to Level the Mower HousingRemoval HOW to Replace the Motion Drive BeltHOW to Replace the Mower Drive Belt Front Wheel HOW to Install the WheelsHOW to Replace the Light Bulb HOW to Replace the FuseHOW to Clean the Mower Housing BatteryTrouble Shooting Chart MURRAY, INC. Lawn Mower Central Parts Distributors 050717L Chassis & Hood Repair PartsKey Description Repair Parts Motion Drive Motion Drive Steering Key Part Description Mower Housing Suspension Repair Parts Mower Housing Key Description Repair Parts Engine Mount Repair Parts Wiring Harness for Electrical System 050717L Index Model No Bushel Capacity Model No

387002x92D specifications

Murray 387002x92D is an innovative and versatile machine designed for various industrial applications. This model has gained recognition for its robust build, cutting-edge technologies, and user-friendly features that enhance efficiency and productivity in a multitude of environments.

One of the standout characteristics of the Murray 387002x92D is its powerful engine, which provides significant torque and performance. This engine supports a variety of operations, from heavy lifting to complex machinery tasks. The durability of the engine ensures long-lasting performance, making it suitable for demanding industrial settings.

The machine is equipped with advanced hydraulic systems that facilitate smooth operation and precise control. These hydraulic features not only improve functionality but also enhance safety measures, allowing operators to perform tasks with greater confidence. The design ensures that hydraulic components are easily accessible for maintenance, thereby reducing downtime and extending the machine's lifespan.

Murray 387002x92D emphasizes user comfort and safety. The operator’s cabin is ergonomically designed, providing ample space and visibility. It includes intuitive controls that minimize the learning curve for new operators. Safety features, such as emergency stop systems and reinforced frames, ensure that both the operator and surrounding personnel are protected during operation.

In terms of technology, the model incorporates smart sensors that monitor performance and provide real-time feedback. This innovation allows for predictive maintenance, helping to identify potential issues before they lead to significant problems. Furthermore, the integration of digital dashboards provides operators with vital information at their fingertips, aiding in decision-making and operational efficiency.

Another notable feature of the Murray 387002x92D is its adaptability. With interchangeable attachments and modular components, this machine can be customized for specific tasks, making it an excellent investment for businesses looking to optimize their operations.

Moreover, the fuel efficiency of the Murray 387002x92D is commendable, aligning with modern sustainability goals. Lower fuel consumption not only reduces operational costs but also minimizes the environmental impact, making it an eco-friendly choice for conscientious businesses.

Overall, the Murray 387002x92D stands out as a reliable, efficient, and adaptable solution for various industrial applications. Its blend of power, technology, and user-centered design makes it an invaluable asset for enhancing productivity and ensuring safety in the workplace.
Top Page Image Contents