Nilfisk-Advance America E 130.2 Typical fields of application, Rims, alu, Minium, Flag, Stones

5.2 Typical fields of application

Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Nilfi sk in association with accessories and detergents.

Task	Accessories ‘Click	Cleaning method
	& Clean’
Car	Car nozzle,	1. Apply Car Combi Cleaner with the foam sprayer. Always
	auto brush,	start from the bottom and work upwards. Let Car Combi
	underchassis	Cleaner act for at least 5 min.
	nozzle,	2. Wash the car with the car nozzle, which has been optimized for
	Foam sprayer,	quick and gentle cleaning of enamelled surfaces (the jet is wider
	Car Combi Cleaner	and not so sharp). Start at the front of the car and work back-
		wards to avoid water from penetrating by the door mouldings.
		3. Use the brush for removal of traffic film which is not removed by the
		nozzle. If the car is very dirty, apply Car Combi Cleaner again.
		4. Attach the undercarriage nozzle and clean undercarriage and
		wheel arches.
		5. Remove water from the surface of the car with the scraper
		on the car brush. Make sure that all grains of sand etc. have
		been removed before using the scraper. Wipe with a wash lea-
		ther where the scraper cannot reach.
Rims, alu-	Rim brush,	Apply Alu Cleaner with an automizer. Let it act for approx.
minium	auto nozzle,	5 min. and wash with the rim brush. For steel rims, use Car Com-
	atomizer,	bi Cleaner. Use the foam sprayer and wash with rim brush.
	Alu Cleaner	Be careful! The high pressure jet may damage the tyres.
Flag-	Powerspeed®	Wash towards outlets or the like. On surfaces with moss or
stones,	nozzle,	algae you may start by applying Stone & Wood Cleaner with
concrete	Stone & Wood	the foam sprayer. Wash before the soap dries. Another
floors and	Cleaner,	more effective and quicker method is to use the Patio
other hard	Patio Cleaner	Cleaner. Thus you will also avoid splashes.
surfaces
Garden	Wood Cleaner	Apply Wood Cleaner and wash before the soap dries.
furniture,	Garden brush	NOTE: Use the garden brush to clean off the dirt.
wood
Brickwork,	Powerspeed®	Same method as for fl agstones, but be careful - bad joints and
Wood	nozzle,	wood may be damaged by high pressure. You may choose only
work	Stone & Wood	to use the Tornado® nozzle. Adjust the distance (pressure) to
	Cleaner,	the quality of the joints and the wood. Patio Cleaner can also be
	Patio Cleaner	used on vertical surfaces.
Gutter	Underchassis spray	Wash the gutter with the nozzle. Always wash towards
	lance	downpipes. Beware not to spray under the roofi ng.
Cleaning	Tube cleaner	Push the tube cleaner approx. ½ m (to mark) into a tube or drain
of drain		and activate the trigger of the spray handle. The nozzle opening
pipes, out-		turning backwards will pull the cleaner through the tube. The
lets, down		nozzle will break down the „plug“ and fl ush the dirt backwards.
pipes etc.
Rust, paint	Water/sandblasting	Mount the water/sand blasting equipment and rust and paint
	equipment	is effi ciently and quickly removed. Beware not to damage the
		surface to be sandblasted.

Green- Tornado® PR nozzle

house brush, Stone & Wood Cleaner

Wash with high pressure and maybe a brush. You may use Stone & Wood Cleaner to remove moss and algae.

Garden	Tornado® PR	Rinse the worst dirt off with the nozzle. Apply Metal Cleaner with
tools,	nozzle, Power-	the foam sprayer and let it act for approx. 5 min. Wash with the
lawn	speed® nozzle,	nozzle. You may use the multiangle adaptor for hard to get at
mover	multiangle adaptor,	areas to avoid splashing.
	Metal Cleaner

11