Nilfisk-Advance America E 140.2, E 145.2, E 130.2 manual Operating your pressure washer

Page 6

3.3Mounting of quick coupling

3.4Mounting of high pressure hose

1.Screw the quick coupling (16) tight on to the water inlet (2).

Note: The inlet ﬁ lter must al- ways be ﬁ tted in the water inlet pipe to ﬁ lter out sand, limestone and other impurities as these will damage the pump valves.

Caution: Failure to ﬁ t the ﬁ lter will invalidate the guarantee.

Attach the high pressure hose

(4) to the spray gun (7).

De h the high pressure hose by pressing the pawl (A).

4 Operating your pressure washer

4.1Connection of high pressure hose (models without hose reel)

1.Mount the high pressure hose on the outlet (3).

Image 6

Contents Nilfisk E Copyright 2011 Nilfisk, Division of Nilfisk-Advance A/S Safety Precautions and Warnings Symbols used to mark in- structions Index Water connection Connection to Mains power connectionDescription ApplicationModel survey Before you start using your pressure washerOperation elements Speciﬁcations See model tagOperating your pressure washer Mounting of quick coupling Mounting of high pressure hoseConnection of high pressure hose models without hose reel Water connection Min m and max m willPage Pressure regulation on the Tornado PR- nozzle Stationary useImportant The bearing capacity of the wall hook is max kg Fields of application and working methods GeneralMechanical effect Typical ﬁelds of application Task Accessories ‘Click Cleaning method Clean’ CarCleaning Rims, aluAfter using your pressure washer Frost damages are not covered by the guaranteeStorage of accessories Maintenance Trouble-shooting Warranty conditions Further informationRecycling the washer Accessories EU Declaration of Conformity