6 After using your pressure washer
6.1 Storing the washer
6.2Winding up of electric cable and high pressure hose
The machine should be sto- red in a
Pump, hose and accessories should always be emptied of water prior to storing as follows:
1.Stop the machine (turn the start/stop switch (1) to posi- tion “O” and detach water hose and accessory.
2.Restart the machine and activate the trigger. Let the machine run until no more water runs through the spray gun.
To avoid accidents, the electric cable and the high pressure hose should always be winded
3.Stop the machine, unplug and wind up hose and cable.
4.Place spray handle, nozzles and other accessories in the holders of the machine.
Should the machine by mistake be frozen, it will be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the guarantee!
carefully up.
1.Wind up the electric cable on the appropriate hooks. Built- in clip for good holding (1).
The lower hook can be turned to release the electric cable.
2.The high pressure washer comes in two models: A) with hook for storage of high pres- sure hose (14) - B) with a hose reel (13).
6.3 Storage of accessories
a + f
| f | The standard accessories | |
| (spray gun (f), spray lance (a), | ||
| d | ||
| nozzles (b) foam sprayer (c)) | ||
| b | can be stored on the pressure | |
| washer. | ||
a | e | The nozzle cleaning tool (d) | |
c | |||
| and a Click & Clean brush | ||
|
| (e) can also be stored on the | |
|
| product. |
12