4.2 Mounting of spray | 1. Push the spray lance (6) into |
lance and Click & Clean | the spray gun (7) and screw |
nozzles | it on. |
2. Attach the nozzle.
Warning: When
attaching the Click
&Clean nozzles, the pawl on the
side of the spray lance should come out again.
Note: The Tor- nado® PR noz- zle and the foam
sprayer feature a swivel lock, which must be positioned in the hole in the Click & Clean spray lance.
Press the pawl to detach the Click & Clean nozzle.
Note: The spray lance (6) has a
4.3 Water connection | An ordinary 1/2" garden hose of | |
| min. 10 m and max. 25 m will | |
| be suitable. | |
|
|
|
|
|
|
NOTE: Connec- tion to the public mains according to regulations.
IMPORTANT! Only use wa- ter without any impurities. If there is a risk of running sands in the inlet water (i.e. from your own well), an additional fi lter should be mounted.
1.Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrat- ing the machine.
Note: Check that the fi lter is
fitted in the water
inlet pipe and that it is not clogged up.
2.Connect the water hose to the water supply by means of the quick connector (inlet water, max. pressure: 10 bar, max. temperature: 50°C).
3.Turn on the water.
7