Nilfisk-Advance America E 140.2, E 145.2, E 130.2 manual Index, Safety Precautions and Warnings

Page 3

Index

 

1

Safety precautions and warnings

3

2

Description

4

3

Before you start using your pressure washer

5

4

Operating your pressure washer

6

5

Fields of Application

 

 

and Working Methods

10

6

After using your pressure washer

12

7

Maintenance

13

8

Trouble Shooting

14

9

Further information

15

10

EC Declaration of Conformity

17

1 Safety Precautions and Warnings

Symbols used to mark in- structions

Do not let children or people who have not read the instruc- tion manual operate the ma- chine.

Before starting up your machine please check it carefully for any defects. If you fi nd any, do not start up your machine and con- tact your Nilfi sk distributor.

Especially check:

The insulation of the electric cable should be faultless and without any cracks. If the electric cable is damaged, an authorized Nilfi sk distributor should replace it.

Before starting up your high-pres- sure washer for

the fi rst time, this instruction manual

must be read through carefully. Save the instructions for later use.

Safety instructions marked with this

symbol must be observed to pre-

vent danger to persons.

WARNING!

High pressure jets can be dangerous. Never direct the water jet at persons, pets, live electrical equipment or the machine itself.

Never try to clean clothes or footwear on yourself or other persons.

Hold the spray lance fi rmly with both hands. The spray lance is affected by a thrust of up to 16.4 N during ope- ration.

The operator and anyone in the immediate vicinity of the site of cleaning should take action to protect themselves from being struck by debris dislodged during operation. Wear goggles during opera- tion.

This symbol is used to mark

safety instruc- tions that must

be observed to prevent damage to the

machine and its performance.

This symbol indicates tips and instructions

to simplify work and to ensure a safe operation.

Never use the machine in an environment where there could be a danger of explo- sion. If any doubt arises, please contact the local authorities.

It is not allowed to clean asbestos-containing surfaces with high pressure.

This high pressure washer must not be used at tempe- ratures below 0°C.

Never let any persons stay under the product when stored on the wall.

WARNING!

Inadequate extension cables can be dangerous. Cables on drums should always be com- pletely unwinded to prevent the cable from overheating.

3

Image 3
Contents Nilfisk E Copyright 2011 Nilfisk, Division of Nilfisk-Advance A/S Safety Precautions and Warnings Symbols used to mark in- structionsIndex Application Mains power connectionDescription Water connection Connection toSpecifications See model tag Before you start using your pressure washerOperation elements Model surveyOperating your pressure washer Mounting of quick coupling Mounting of high pressure hoseConnection of high pressure hose models without hose reel Min m and max m will Water connectionPage Pressure regulation on the Tornado PR- nozzle Stationary useImportant The bearing capacity of the wall hook is max kg Fields of application and working methods GeneralMechanical effect Rims, alu Task Accessories ‘Click Cleaning method Clean’ CarCleaning Typical fields of applicationAfter using your pressure washer Frost damages are not covered by the guaranteeStorage of accessories Maintenance Trouble-shooting Warranty conditions Further informationRecycling the washer Accessories EU Declaration of Conformity