Makita ER2650LH dimensions Stop switch, Fuel tube

Page 11

Repair

P 11/ 14

 

[4] DISASSEMBLY/ASSEMBLY

 

[4]-10. Carburetor (cont.)

Fig. 26

ASSEMBLING

(Nipple to connect

Carefully assemble each part in right direction and order. (Fig. 25)

yellow tube of Tank)

1R127

 

AIRTIGHT TEST

 

Connect 1R127 to the nipple of Carburetor as drawn in Fig. 26.

 

Give air pressure from 1R127 and check if the pressure gauge indicates

Nipple of Carburetor to connect

0.05Mpa for around 10 seconds, then there is no problem with Carburetor.

black tube of Tank

 

ASSEMBLY TO ENGINE

(1)Assemble Cleaner plate assembly, Carburetor and Gasket to Insulator with two M5x60 Hex socket head bolts.

(2)Connect tubes (black & yellow) of Fuel tank to the nipple of Carburetor, then connect Pipe from Cylinder and Breather pipe to Cleaner plate. (Fig. 27)

(3)Set Air cleaner elements (sponge at cover side & felt at engine side) in Cleaner plate and fix Cleaner cover assembly. (Fig. 27)

Fig. 27

1.Connect two tubes (black & yellow) of Fuel tank to

the nipple of Carburetor, then connect Breather pipe and Pipe from Cylinder to Cleaner plate assembly.

Note: Make sure two tubes do not interfere with Cylinder cover.

2.Set Air cleaner elements (sponge at cover side & felt at engine side) in Cleaner plate and fix Cleaner cover by fitting two interlocking tabs and slots.

Black tube

Tabs of Cleaner plate assembly

Cleaner cover assembly

Fuel tank

Yellow tube

[4]-11. Stop switch

Fig. 28

CHECKING STOP SWITCH

Check the continuity of two Lead wires’ ends routed from Control lever with Tester. (Fig. 28)

Stop switch is in order if it works as following:

• Tester shows no connectivity when Engine ON

• Tester shows a connectivity when Engine OFF

[4]-12. Fuel tube

FUEL TUBE ASSEMBLY

(1)Assemble Tube complete; black tube & yellow tube through grommet, to Fuel tank. (Fig. 29)

(2)Assemble Gasoline filter and Hose clamp to the black tube, then put them into Fuel tank. (Fig. 30)

Fig. 29

black tube

yellow tube

grommet

Fig. 30

Gasoline filter

Black tube

Hose clamp

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Standard equipment SpecificationOptional accessories Repair Necessary Repairing ToolsAssembling Engine and ShaftDisassembling Head case complete Shaft pipe completeWasher Clutch drum ClutchDisassembling of Ignition Coil IgnitionChecking Plug CAP Checking Spark PlugFlywheel Repair DISASSEMBLY/ASSEMBLY 4-9. Recoil starter Carburetor Cleaning / MaintenanceFuel tube Stop switchEngine block MaintenanceDisassembly Spark arresterOverlapped each other Repair DISASSEMBLY/ASSEMBLY 4-14. Engine blockFastening torque Assembly

ER2650LH specifications

The Makita ER2650LH is a powerful and efficient brushcutter designed for professionals and homeowners alike. This cutting-edge gardening tool boasts a robust engine and advanced features, making it an excellent choice for tackling tough landscaping tasks.

One of the standout features of the ER2650LH is its 25.4cc 2-stroke engine, which delivers impressive power while maintaining fuel efficiency. This engine is designed to produce minimal emissions, adhering to environmental standards while providing substantial performance. The lightweight construction of the unit enhances maneuverability, allowing users to work for extended periods without fatigue.

The ergonomics of the Makita ER2650LH are thoughtfully designed, featuring a comfort grip handle that reduces vibration. This allows for better control and reduces hand fatigue during prolonged usage. The unit also comes equipped with a bicycle-type handle that improves stability and precision, making it easier to navigate around obstacles.

One of the notable technologies incorporated into the ER2650LH is the Easy Start system. This feature allows for smooth and effortless starting with minimal effort. The inclusion of a purge bulb ensures that fuel is readily available to the engine, making starting a breeze even in challenging conditions.

The cutting performance of the ER2650LH is enhanced by its specially designed cutting head. It is compatible with both nylon lines and blade attachments, offering versatility for various landscaping tasks. The unit is capable of handling thick grass, weeds, and light brush, making it suitable for residential gardens, parks, and commercial landscaping.

Makita also prioritizes user safety with the ER2650LH. The machine features an adjustable guard that helps protect operators from debris while providing clear visibility of the cutting area. Additionally, the unique design of the fuel tank allows for easy filling and monitoring of fuel levels, ensuring that users can work uninterrupted.

In summary, the Makita ER2650LH brushcutter is a technologically advanced tool that combines power, efficiency, and user comfort. Its lightweight design, innovative starting system, and versatility make it an ideal choice for anyone seeking a reliable gardening solution. Whether for professional use or personal projects, the ER2650LH stands out as a top-notch option for landscaping enthusiasts.
Top Page Image Contents