Ingersoll-Rand SLB150, SLB200, SLB600, SLB1200, SLB300 manual Installation, Operation

Page 4

Specifications Table

Model

Capacity

Lever Pull to lift

Load

Wt. of chain per

No. of chain

Hoist Net Weight

with standard

No.

(metric tons)

rated load (kg)

Chain size (mm)

0.3 m of lift (kg)

falls

1.5 m of lift (kg)

 

 

 

 

 

 

SLB150

3/4

18.5

6 x 18

0.24

 

7.03

SLB200

1

27

1

 

 

 

SLB300

1-1/2

24

7.1 x 21.2

0.34

11.0

 

SLB600

3

24

10 x 30

1.66

 

20.0

SLB1200

6

26

1.32

2

30.4

 

INSTALLATION

Prior to installing hoist, carefully inspect it for possible shipping damage. Hoists are supplied fully lubricated from the factory. Ensure load chain is lubricated prior to hoist operation.

CAUTION

•Owners and users are advised to examine specific, local or other regulations, including American National Standards Institute and/or OSHA Regulations, which may apply to a particular type of use of this product, before installing or putting hoist to use.

The SLB lever chain hoist can be used in any position provided it is rigged to pull in a straight line from top hook to bottom hook.

The hoist body must be positioned so that it does not contact the load or support members when in use. Ensure hand lever movement is unrestricted.

When operating in limited areas suitable lifting attachments or slings must be used to prevent hoist body and hand lever from being obstructed.

CAUTION

•Ensure hoist top and bottom hooks are properly rigged and hook latches are engaged, prior to use.

Initial Operating Checks

Operate hoist with a test load (10% of rated capacity) by raising and lowering this load several times. Verify brake operation by lowering same load to check load does not slip when lowering stops.

NOTICE

•Each time a load is lifted, operation of load brake should be checked by raising load slightly and stopping to ensure brake will hold load before continuing to lift load.

Top Hook

Hook Latch

E

DA

Free Knob

F

O

 

R

L

 

E

 

 

Selector Lever

 

 

Load Chain

 

Hand Lever

(Hook side)

 

 

 

Bottom

 

 

Hook

 

 

Chain Stopper

 

Load Chain

 

(Anchor side)

 

 

(Dwg. MHP0830)

Familiarize operators and personnel responsible for hoist installation and service with ASME B30.21 specifications and this manual prior to placing unit into service. All requirements of this specification, including testing should be met before approving hoist for operation.

OPERATION

The four most important aspects of hoist operation are:

1.Follow all safety instructions when operating hoist.

2.Allow only personnel trained in safety and operation of this hoist to operate hoist.

3.Subject each hoist to a regular inspection and maintenance procedure.

4.Be aware of hoist capacity and weight of load at all times.

WARNING

•The hoist is not designed or suitable for lifting, lowering or moving persons. Never lift loads over people.

Positioning Unloaded Hook (Neutral Position)

Refer to Dwg. MHP0830 on page 4.

Check that chain stopper (54) is securely fastened in last link of load chain anchor end. The load chain stopper is intended to prevent load chain from becoming disengaged from hoist and is not intended to support the load.

4

MHD56109 - Edition 9

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Lever Chain Hoist Models Safety Information Safety SummarySpecifications Safe Operating InstructionsGeneral Model Code ExplanationInstallation OperationEnsure load is properly seated in saddle of bottom hook Lowering Load Down Position PayoutInspection Records and ReportsFrequent Inspection Load Chain ReportsPeriodic Inspection Semiannually QuarterlyModel Chain Size Normal Discard Length mmTroubleshooting LubricationGeneral GearMaintenance General DisassemblyHoist Disassembly Installing New Load ChainCleaning, Inspection and Repair Hoist AssemblyGear Timing Brake End AssemblyLoad Test Hoist Assembly Parts Drawing Hoist Assembly Parts List Description 75tLCCF015 Parts Ordering Information AccessoriesReturn Goods Policy Declaration Of Conformity MHD56109 Edition MHD56109 Edition Warranty Visible Loss or DamageConcealed Loss or Damage Damage ClaimsIngersoll-Rand

SLB150, SLB300, SLB1200, SLB600, SLB200 specifications

The Ingersoll-Rand SLB series of portable and stationary air compressors comprises several models, including the SLB200, SLB600, SLB1200, SLB150, and SLB300. These compressors are renowned for their reliability, performance, and innovative technologies, making them ideal for a wide range of industrial applications.

The SLB200 model comes equipped with a robust design that emphasizes mobility and efficiency. It features a compact footprint while delivering up to 200 CFM, making it suitable for smaller job sites or where space is limited. The SLB200 integrates advanced control systems that optimize airflow and pressure management, ensuring consistent performance under varying load conditions.

Next in the lineup is the SLB600, a powerhouse that delivers significantly higher capacity, reaching up to 600 CFM. This model offers advanced noise reduction technologies, which help minimize operational noise, making it an excellent choice for urban work sites. With its high-efficiency airend technology, the SLB600 also significantly improves fuel consumption, enabling cost-effective operation over the long term.

For those requiring even more power and versatility, the SLB1200 stands out, providing up to 1200 CFM. This model is engineered for heavy-duty applications, featuring durable construction that withstands rugged use. The SLB1200 comes equipped with advanced diagnostics and monitoring systems, allowing operators to track performance metrics in real-time. This feature enhances maintainability and helps prevent unexpected downtime.

The SLB150, while smaller, does not compromise on performance. Delivering 150 CFM, it is particularly valued in industries where portability is crucial. The SLB150 operates efficiently in both stationary and mobile applications, making it a favorite among contractors and repair professionals. Its lightweight design and integrated wheels ensure easy transport without sacrificing power.

Finally, the SLB300 model fills the gap for those needing a mid-range option with superior efficiency. Operating at up to 300 CFM, it strikes a balance between power and practicality. This model is equipped with enhanced filtration systems to ensure the highest air quality, which is essential for applications sensitive to contamination.

Overall, the Ingersoll-Rand SLB series is characterized by its commitment to innovation, reliability, and efficiency, catering to the diverse needs of modern industries while ensuring optimal performance and durability across all models.
Top Page Image Contents