Ingersoll-Rand SLB200, SLB600, SLB1200 Ensure load is properly seated in saddle of bottom hook

Page 5

CAUTION

• Ensure load is properly seated in saddle of bottom hook.

In NEUTRAL “N” position hand lever does not engage ratchet gear. The hand lever free-wheels until selector lever is shifted to UP or DOWN position.

1.Set selector lever to NEUTRAL (center) position.

2.Turn free chain knob counterclockwise.

3.Grasp and pull one side of load chain or turn free knob until desired hook location is achieved.

4.Connect hook to load. Pull anchor side of load chain or turn free knob until chain slack is removed.

WARNING

•Do not support or hang loads from load chain anchor end. Brake may not hold load or operate correctly.

Lifting Load (UP Position - Haul-In)

Refer to Dwg. MHP0825 on page 5.

The following procedure assumes hoist is in NEUTRAL (center) position and hook is attached to a load, but hoist is not supporting the load.

1.Place selector lever in UP position.

2.Rotate free knob clockwise.

3.Pull anchor end of load chain until slack is removed.

4.Rotate (ratchet) hand lever in clockwise direction to raise (haul-in) load.

NOTICE

•Ratchet may not engage and raise (haul-in) load until all chain slack is removed and hoist is supporting load weight. If hand lever movement does not produce lifting, apply tension to anchor side of load chain while ratcheting until slack is removed and hoist begins lifting load. If hoist does not operate properly under load, remove load, inspect and repair hoist.

Lowering Load (DOWN Position - Payout)

Refer to Dwg. MHP0825 on page 5.

WARNING

•Do not continue lowering load after chain stopper has contacted hoist body as damage may occur to hoist resulting in a falling load which can cause severe injury, death or property damage.

The following procedure assumes hoist selector lever is in UP position, hoist is holding a load and the operator wants to lower (payout) the load:

1.Place selector lever in DOWN position.

2.Rotate (ratchet) hand lever in counterclockwise direction to lower (payout) load.

CAUTION

•To prevent injury or property damage always lower loads until load chain becomes slack before shifting to NEUTRAL position.

Storing the Hoist

1.Always store hoist in a no load condition.

2.Switch selector lever to NEUTRAL (center position).

3.Wipe off all dirt and water.

4.Oil the chain, hook pins and hook latch pins.

5.Hang in a dry place.

6.Before returning hoist to service follow instructions for ‘Hoists not in Regular Use’ in “INSPECTION” section.

Neutral

“Up”

“Down”

Free Chain Position

(Haul In) Position

(Payout) Position

Free

Knob

F

R

E E

D

A

O

L

R

F

 

E

 

E

D

 

A

L

O

R

F

 

E

 

E

D

 

A

L

O

Selector

Lever

(Dwg. MHP0825)

MHD56109 - Edition 9

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Lever Chain Hoist Models Safety Summary Safety InformationSafe Operating Instructions SpecificationsGeneral Model Code ExplanationOperation InstallationLowering Load Down Position Payout Ensure load is properly seated in saddle of bottom hookRecords and Reports InspectionFrequent Inspection Load Chain ReportsSemiannually Quarterly Periodic InspectionModel Chain Size Normal Discard Length mmLubrication TroubleshootingGeneral GearGeneral Disassembly MaintenanceHoist Disassembly Installing New Load ChainHoist Assembly Cleaning, Inspection and RepairLoad Test Brake End AssemblyGear Timing Hoist Assembly Parts Drawing Description 75t Hoist Assembly Parts ListLCCF015 Return Goods Policy AccessoriesParts Ordering Information Declaration Of Conformity MHD56109 Edition MHD56109 Edition Visible Loss or Damage WarrantyConcealed Loss or Damage Damage ClaimsIngersoll-Rand

SLB150, SLB300, SLB1200, SLB600, SLB200 specifications

The Ingersoll-Rand SLB series of portable and stationary air compressors comprises several models, including the SLB200, SLB600, SLB1200, SLB150, and SLB300. These compressors are renowned for their reliability, performance, and innovative technologies, making them ideal for a wide range of industrial applications.

The SLB200 model comes equipped with a robust design that emphasizes mobility and efficiency. It features a compact footprint while delivering up to 200 CFM, making it suitable for smaller job sites or where space is limited. The SLB200 integrates advanced control systems that optimize airflow and pressure management, ensuring consistent performance under varying load conditions.

Next in the lineup is the SLB600, a powerhouse that delivers significantly higher capacity, reaching up to 600 CFM. This model offers advanced noise reduction technologies, which help minimize operational noise, making it an excellent choice for urban work sites. With its high-efficiency airend technology, the SLB600 also significantly improves fuel consumption, enabling cost-effective operation over the long term.

For those requiring even more power and versatility, the SLB1200 stands out, providing up to 1200 CFM. This model is engineered for heavy-duty applications, featuring durable construction that withstands rugged use. The SLB1200 comes equipped with advanced diagnostics and monitoring systems, allowing operators to track performance metrics in real-time. This feature enhances maintainability and helps prevent unexpected downtime.

The SLB150, while smaller, does not compromise on performance. Delivering 150 CFM, it is particularly valued in industries where portability is crucial. The SLB150 operates efficiently in both stationary and mobile applications, making it a favorite among contractors and repair professionals. Its lightweight design and integrated wheels ensure easy transport without sacrificing power.

Finally, the SLB300 model fills the gap for those needing a mid-range option with superior efficiency. Operating at up to 300 CFM, it strikes a balance between power and practicality. This model is equipped with enhanced filtration systems to ensure the highest air quality, which is essential for applications sensitive to contamination.

Overall, the Ingersoll-Rand SLB series is characterized by its commitment to innovation, reliability, and efficiency, catering to the diverse needs of modern industries while ensuring optimal performance and durability across all models.
Top Page Image Contents