Ingersoll-Rand SMB005 manual Specifications, General, Model Code Explanation, Example SMB 005 10 8

Page 3

12.When using two hoists to suspend one load, select two hoists each having a rated capacity equal to or more than the load. This provides adequate safety in the event of a sudden load shift.

13.Never place your hand inside the throat area of a hook.

14.Never use the hoist load chain as a sling.

15.Never operate a hoist when the load is not centered under the hook. Do not “side pull” or “yard.”

16.Never operate a hoist with twisted, kinked, “capsized” or damaged load chain.

17.Do not force a chain or hook into place by hammering.

18.Never insert the point of the hook into a chain link.

19.Be certain the load is properly seated in the saddle of the hook and the hook latch is engaged.

20.Do not support the load on the tip of the hook.

21.Never run the load chain over a sharp edge. Use a sheave.

22.Pay attention to the load at all times when operating the hoist.

23.Always ensure that you, and all other people, are clear of the path of the load. Do not lift a load over people.

24.Never use the hoist for lifting or lowering people, and never allow anyone to stand on a suspended load.

25.Ease the slack out of the chain and sling when starting a lift. Do not jerk the load.

26.Do not swing a suspended load.

27.Never weld or cut on a load suspended by the hoist.

28.Never use the hoist chain as a welding electrode.

29.Do not operate hoist if chain jumping, excessive noise, jamming, overloading, or binding occurs.

30.Only operate the hoist with manual power.

31.After use, or when in a non-operational mode, the chain hoist should be secured against unauthorized and unwarranted use.

32.Do not leave a load suspended when the hoist is unattended or not in use.

WARNING TAG

Each hoist is supplied from the factory with a multi-language warning tag. If the tag is not attached to your unit, order a new tag and install it. Refer to the parts list for the part number. Read and obey all warnings and other safety information attached to this hoist. Tag may be shown smaller than actual size.

WARNING

Failure to follow these warnings may result in death, severe injury or property damage:

•Read manual before using this product.

•Do not lift, lower or pull more than

rated load.

• Do not lift people or loads over people.

•Do not operate with twisted or damaged chain or kinked, frayed or cut rope or strap.

•Do not operate lever hoist or puller with handle extension (cheaters).

•Do not operate if damaged or malfunctioning.

•Do not operate when chain, rope or strap cannot form straight line with load.

•Do not operate with other than manual power.

•Do not operate with open latch, twisted hook or without a latch.

•Always keep minimum of 3 wraps of wire rope or 2 wraps of strap on drum.

•Do not remove or obscure warning labels.

SPECIFICATIONS

General

Manual Chain Hoists can be mounted to the suspension shaft of a trolley or a permanent mounting structure. The hoist is designed to lift and lower loads up to rated capacity with minimal hand chain effort.

To determine your basic hoist configuration, refer to capacity and lot number label located on gear end cover for model number information.

Model Code Explanation

Example:

SMB - 005 - 10 - 8 V

Series

Capacity

Lift

Hand Chain

Slip Clutch

MHD56391 - Edition 2

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Manual Chain Hoist Models Safety Information Safety SummarySafe Operating Instructions Example SMB 005 10 8 SpecificationsGeneral Model Code ExplanationInstallation Records and Reports OperationInspection Storing the HoistHook Throat Opening Model No Normal Discard Frequent InspectionPeriodic Inspection Load Chain ReportsHoists Not in Regular Use LubricationLoad Chain Length Inspection Normal Length Discard Length Model NoMaintenance TroubleshootingAdjusting with a Weight Adjusting with a ScaleSlip Clutch General Disassembly DisassemblyCleaning, Inspection and Repair Assembly Load Test Hand Chain Adjustment or ReplacementService Notes Hoist Assembly Parts DrawingTon 2 ton Hoist Assembly Parts ListSpring Anchor Pin Disposal Accessories and Kits Parts ListParts Ordering Information Return Goods PolicyDeclaration of Conformity Declaration of ConformityDamage Claims WarrantyVisible Loss or Damage Concealed Loss or Damage

SMB010, SMB020, SMB005, SMB030, SMB015 specifications

Ingersoll-Rand has a long-standing reputation for high-quality air compressors and associated products, featuring robust engineering and innovative technologies. Among their popular models are the SMB020, SMB005, SMB050, SMB015, and SMB030. Each model caters to a specific range of applications, making them versatile tools for various industries.

The SMB005 is ideal for small projects or businesses that require minimal compressed air. This model features a compact design, allowing it to fit into tight spaces without sacrificing performance. It boasts a low operating noise level, which is a critical factor for indoor applications. The SMB005 is equipped with a reliable motor and efficient air delivery, ensuring that it meets the demands of various pneumatic tools while maintaining energy efficiency.

Moving up the range, the SMB015 offers increased power and airflow, suitable for medium-sized applications. With advanced engineering, this model provides excellent reliability and performance. Its user-friendly interface allows for easy operation and monitoring. The SMB015’s built-in thermal protection prevents overheating, adding an additional layer of safety and longevity to the compressor.

The SMB020 model caters to slightly larger applications, providing enhanced airflow and pressure capabilities. This model has been designed with advanced noise-reduction technology, delivering a quieter operation while ensuring that it performs optimally. Its durable construction allows it to endure rigorous working conditions, making it a hit among professionals in construction, automotive, and manufacturing sectors.

For those seeking higher performance, the SMB030 and SMB050 models are standout choices. The SMB030 is engineered for heavy-duty applications, featuring high efficiency and reliability. With an advanced control system, it manages energy consumption effectively while ensuring maximum output. This model integrates modern technologies such as Variable Speed Drive (VSD), which adjusts the compressor's speed according to the air demand, thus optimizing energy usage and reducing overall costs.

Lastly, the SMB050 is the most powerful model in this series, designed for demanding tasks. It comes with advanced monitoring systems that allow users to track performance metrics in real-time. The robust cooling system ensures consistent operation, even under heavy loads. Its ease of maintenance and serviceability makes it a preferred choice for facilities that rely on consistent uptime.

In conclusion, the Ingersoll-Rand SMB series, including the SMB005, SMB015, SMB020, SMB030, and SMB050, demonstrates a blend of cutting-edge technologies, user-friendly design, and versatility. Each model caters to specific needs, providing reliable performance across various applications and industries.
Top Page Image Contents