Ingersoll-Rand SMB050, SMB015, SMB030, SMB005 manual Hand Chain Adjustment or Replacement, Load Test

Page 12

Hand Chain Adjustment or Replacement

CAUTION

•When cutting the weld side of a hand chain link, do not cut or nick the opposite side. A damaged link must be replaced to prevent premature failure. A falling hand chain can cause injury.

(Dwg. MHP0016)

1.To create a “C” link, cut the welded side of the link with a hack saw. Clamp one side of the “C” link in a vise and bend it open by using a pliers to grip the exposed part of the link.

(Dwg. MHP0014)

2.If the hand chain is being replaced, disconnect it at the “C” link and carefully remove the hand chain.

3.When replacing a hand chain, cut a length 2 times the required hand chain drop plus about one foot (305 mm). For adjustments, remove or add a length of chain twice the difference in hand chain height. To prevent the hand chain from twisting, maintain an even number of links, by removing or adding an even number of links.

4.If you are replacing the hand chain, run the new hand chain up through the left hand chain guide, around the handwheel, making sure the hand chain is seated in the handwheel pockets, and back down through the right hand chain guide.

5.Connect the hand chain ends with the “C” link(s), making the total number of links even, and bend the “C” link(s) shut.

6.Make sure the hand chain is not twisted. If twisted, untwist or open a “C” link and remove one hand chain link. Refer to Dwg. MHP0015 on page 12.

(Dwg. MHP0015)

Load Test

Prior to initial use, all new, extensively repaired, or altered hoists shall be load tested by or under the direction of a person trained in the operation and maintenance of this hoist, and a written report furnished confirming the rating of the hoist. Test hoist to 125% of the rated hoist capacity. Testing to more than 125% will be required to set overload clutch and may be necessary to comply with standards and regulations set forth in areas outside of the USA.

12

MHD56391 - Edition 2

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Manual Chain Hoist Models Safety Information Safety SummarySafe Operating Instructions Specifications GeneralModel Code Explanation Example SMB 005 10 8Installation Operation InspectionStoring the Hoist Records and ReportsFrequent Inspection Periodic InspectionLoad Chain Reports Hook Throat Opening Model No Normal DiscardLubrication Load Chain Length InspectionNormal Length Discard Length Model No Hoists Not in Regular UseTroubleshooting MaintenanceAdjusting with a Weight Adjusting with a ScaleSlip Clutch General Disassembly DisassemblyCleaning, Inspection and Repair Assembly Hand Chain Adjustment or Replacement Load TestService Notes Assembly Parts Drawing HoistHoist Assembly Parts List Ton 2 tonSpring Anchor Pin Accessories and Kits Parts List Parts Ordering InformationReturn Goods Policy DisposalDeclaration of Conformity Declaration of ConformityWarranty Visible Loss or DamageConcealed Loss or Damage Damage Claims

SMB010, SMB020, SMB005, SMB030, SMB015 specifications

Ingersoll-Rand has a long-standing reputation for high-quality air compressors and associated products, featuring robust engineering and innovative technologies. Among their popular models are the SMB020, SMB005, SMB050, SMB015, and SMB030. Each model caters to a specific range of applications, making them versatile tools for various industries.

The SMB005 is ideal for small projects or businesses that require minimal compressed air. This model features a compact design, allowing it to fit into tight spaces without sacrificing performance. It boasts a low operating noise level, which is a critical factor for indoor applications. The SMB005 is equipped with a reliable motor and efficient air delivery, ensuring that it meets the demands of various pneumatic tools while maintaining energy efficiency.

Moving up the range, the SMB015 offers increased power and airflow, suitable for medium-sized applications. With advanced engineering, this model provides excellent reliability and performance. Its user-friendly interface allows for easy operation and monitoring. The SMB015’s built-in thermal protection prevents overheating, adding an additional layer of safety and longevity to the compressor.

The SMB020 model caters to slightly larger applications, providing enhanced airflow and pressure capabilities. This model has been designed with advanced noise-reduction technology, delivering a quieter operation while ensuring that it performs optimally. Its durable construction allows it to endure rigorous working conditions, making it a hit among professionals in construction, automotive, and manufacturing sectors.

For those seeking higher performance, the SMB030 and SMB050 models are standout choices. The SMB030 is engineered for heavy-duty applications, featuring high efficiency and reliability. With an advanced control system, it manages energy consumption effectively while ensuring maximum output. This model integrates modern technologies such as Variable Speed Drive (VSD), which adjusts the compressor's speed according to the air demand, thus optimizing energy usage and reducing overall costs.

Lastly, the SMB050 is the most powerful model in this series, designed for demanding tasks. It comes with advanced monitoring systems that allow users to track performance metrics in real-time. The robust cooling system ensures consistent operation, even under heavy loads. Its ease of maintenance and serviceability makes it a preferred choice for facilities that rely on consistent uptime.

In conclusion, the Ingersoll-Rand SMB series, including the SMB005, SMB015, SMB020, SMB030, and SMB050, demonstrates a blend of cutting-edge technologies, user-friendly design, and versatility. Each model caters to specific needs, providing reliable performance across various applications and industries.
Top Page Image Contents